how to put string on a husqvarna weed eater

How to Attach String to Husqvarna Weed Eater

By David Miller
AD

Attaching a string trimmer line to your Husqvarna weed eater can be a breeze with the right technique. This essential maintenance task ensures your trimmer's optimal performance, helping you maintain neat and tidy lawn edges. Let's dive into a step-by-step guide that'll make this process a cinch.

Before we begin, ensure your Husqvarna weed eater is powered off and cooled down to avoid any safety hazards. Now, let's get started!

Preparation: Gather Your Equipment

Before you start, you'll need the following items readily available:

AD
How to Replace Trimmer Line in a Husqvarna String Trimmer
How to Replace Trimmer Line in a Husqvarna String Trimmer
How to Change the Line | Weed Eater String | Replace Weed Wacker [2021]
How to Change the Line | Weed Eater String | Replace Weed Wacker [2021]
a man kneeling down with a small blower on his hand and the words starting above it
a man kneeling down with a small blower on his hand and the words starting above it
  • New weed eater string (ensure it's compatible with your Husqvarna model)
  • Scissors or a sharp knife

Having everything within reach will make the process smoother and more efficient.

Understanding Your Husqvarna Weed Eater's Spool

Familiarize yourself with your trimmer's spool. The spool holds the trimmer line and is the component you'll be working with. Husqvarna weed eaters typically use one of two line feed systems: Automatic Feed Head (AFH) or Fixed.

Most modern Husqvarna models use the AFH system, where the line Spools out automatically as you need it. The Fixed system requires you to bump the trimmer head on the ground to release more line. Identify your trimmer's system to ensure you're following the correct instructions.

Installing the Trimmer Line: A Step-by-Step Guide

Now that you're prepared, let's proceed with installing the new trimmer line on your Husqvarna weed eater.

AD

Step 1: Removing the Old Line

Begin by removing the old trimmer line from the spool. If there's any leftover line from your last refill, pull it out gently, cutting any excess with scissors or a sharp knife.

For Fixed Head systems, unscrew the trimmer head counterclockwise to expose the spool. Remove the old line and reassemble the head. For AFH systems, hold the spool cover (where it says 'push' or 'bump') and spin the spool counterclockwise to release the old line.

Step 2: Preparing the New Line

Unroll the new trimmer line from its packaging, ensuring it's the correct type for your Husqvarna model. You'll usually find the model number and compatible line types listed in your user manual or on the product packaging.

AD

Cut the new line to the correct length. Husqvarna recommends using 19 feet of line for their trimmers, but this can vary depending on the specific model. Check your user manual for the precise length required for your weed eater.

Step 3: Winding the Line onto the Spool

Feed one end of the new line through the hole in the center of the spool, leaving a few inches of line sticking out. Begin winding the line around the spool, ensuring it's wound neat and evenly. It's essential to wind the line in the correct direction to ensure smooth feeding—check your user manual for this information, as it varies depending on the model.

Once you've wound the required amount of line, leave a small section unwound at the end (around 6 to 12 inches). This will act as the starting point for your new trimmer line.

AD

Step 4: Installing the Spool

After winding the line, insert the spool back into the housing, ensuring it's correctly aligned with the arrow on the spool pointing in the right direction (usually towards the shaft of the weed eater).

For Fixed Head systems, screw the trimmer head back onto the spool, turning it clockwise until it's securely fastened. For AFH systems, snap the spool cover back into place, ensuring it locks securely.

Step 5: Starting Up Your Trimmer

Now that you've successfully installed the new trimmer line, you're ready to start your Husqvarna weed eater. Pull the starter cord gently, engage the safety catch, and begin trimming your lawn.

Initially, you may need to bump your trimmer head on the ground to release more line. Once your trimmer line has reached its optimal length, you're all set to maintain those neat lawn edges!

Congratulations! You've now successfully replaced the trimmer line on your Husqvarna weed eater. Regularly maintaining your weed eater with these simple steps ensures optimal performance, allowing you to tackle even the toughest garden tasks with ease. Happy trimming!

AD