Husqvarna String Trimmer: How to
Weed eaters, also known as string trimmers, are essential garden tools for keeping your lawn well-maintained. One of the most popular brands in the market is Husqvarna, renowned for their quality and durability. However, even the best tools require regular maintenance to function optimally. One task that often needs attention is replacing or stringing the trimmer line. This process, though straightforward, can cause confusion if you're a first-timer. Let's dive into a step-by-step guide on how to string a weed eater Husqvarna properly.
Before we commence, ensure you have the right spool of line for your Husqvarna weed eater. The type of line varies based on the model, so consult your user manual or look for the model number on your current spool to avoid any guesswork.
Understanding Your Husqvarna Weed Eater
Husqvarna weed eaters come in two main types: Fixed line head and Automatic Feed Head. We'll discuss both to ensure you string your trimmer correctly.
Fixed line head trimmers, also known as fixed line, have a spool that holds a limited amount of line. Once the line wears out, you'll need to replace it. Automatic Feed Head trimmers, on the other hand, have a spool that holds more line and automatically feeds as you use it.
Identifying the Trim Head
First, locate the trim head at the bottom of your Husqvarna weed eater. If it's a spool with two strings, you have an automatic feed head. If it's a spool with one string, it's a fixed line head.
Regardless of the type, you'll need to disassemble the head to access the interior spool. Begin by securing the weed eater in a vice or having someone hold it steady. Then, rotate the trimmer head counterclockwise to unlock it.
Removing the Old Spool
Once unlocked, pull the trim head housing off the trimmer. You'll now see the old spool. If it's an automatic feed head, you'll see a triggering button on the side of the housing. This button allows line to be released when pressed.
With the housing off, you can now remove the old spool. Sometimes, the spool can be lifted out directly. If not, you may need to slide it out carefully.
Preparing the New Spool
Now that you've removed the old spool, it's time to insert the new one. Start by ensuring the new spool is the correct type and size for your Husqvarna weed eater.
Take the new spool and lay it flat, with the notch at the top. Unwind enough line from the spool to create a loop, around 5-6 feet. Ensure the line is taut and evenly wound on the spool.
Inserting the New Spool
Before inserting the new spool, insert the main line through the hole in the trimmer head. You should see a hole on the top of the head, near the middle - this is where the line goes through.
Next, insert the new spool into the trimmer head. Make sure the notch on the top of the spool aligns with the notch on the trimmer head. This ensures the spool won't wobble when in use.
Winding the Line
Now, start winding the line back onto the spool. Wind it clockwise, as this is the direction the spool will rotate when in use. Ensure the line is wrapped tightly against the spool, with no gaps.
Leave around 6-10 inches of line loose at the end once you reach the desired amount. This will prevent the line from over-winding, and allows enough line to extend when you start your weed eater.
Reassembling the Weed Eater
With the new spool wound and the line pulled through the hole, you're ready to reassemble your Husqvarna weed eater.
If it's a fixed line head, simply put the cover back on and rotate it clockwise to lock it back in place. For an automatic feed head, reattach the cover and pull out the line to the desired length - usually about 8-12 inches.
With your Husqvarna weed eater strung correctly, you're now ready to tackle those pesky weeds around your lawn. Regularly checking and replacing your trimmer line will ensure optimal performance and longevity of your tool. Happy trimming!