how to light pilot on rheem water heater

How to Light Pilot on Rheem Water Heater

By Melissa Taylor
AD

Ever found yourself standing in a cold shower, wishing you had taken the time to understand how to light the pilot on your Rheem water heater? You're not alone. Many homeowners face this issue, often due to power outages or simple user error. Don't let a lack of hot water disrupt your daily routine. In this comprehensive guide, we'll walk you through the simple steps to light the pilot on your Rheem water heater.

Before we dive in, it's crucial to understand that safety should always be your top priority when dealing with gas appliances. Ensure the area around your water heater is well-ventilated, and never attempt to light the pilot if you smell gas. If you detect a gas leak, immediately ventilate the area, extinguish any open flames, and contact your local gas company or a professional.

Understanding Your Rheem Water Heater

Rheem is a well-known brand in the water heater industry, offering both tank and tankless models. However, this guide will focus on traditional storage tank models with a pilot light. Before we begin, familiarize yourself with the following components on your Rheem water heater:

AD
How To Light Pilot (Turn On) Water Heater. Honeywell Rheem whirlpool A. O. Smith. 
How To Light Pilot (Turn On) Water Heater. Honeywell Rheem whirlpool A. O. Smith. 
How to Check Water Heater Pilot Light | 6 Effective Steps (2026)
How to Check Water Heater Pilot Light | 6 Effective Steps (2026)
a man working on a water heater with the words quick fix written above it
a man working on a water heater with the words quick fix written above it
  • Gas control valve (on/off switch)
  • Pilot flame indicator
  • Pilot burnerhole
  • Pilot KZ-1 adjustment screw

Identifying the Pilot Assembly

The pilot assembly on your Rheem water heater is where the pilot light is located. It's usually a small coolant-filled tube with a copper or brass tip, connected to the gas control valve. The piloto burnerhole is where the flame sustains. You'll find the KZ-1 adjustment screw nearby, used to regulate the pilot's size.

Preparing to Light the Pilot

Before starting, ensure the power to your home is stable to prevent any electrical issues. Then, follow these preparatory steps:

How to Relight your Water Heater Pilot Light
How to Relight your Water Heater Pilot Light
How To Light Pilot (Turn On) Water Heater. Honeywell Rheem whirlpool A. O. Smith. 
How To Light Pilot (Turn On) Water Heater. Honeywell Rheem whirlpool A. O. Smith. 
  1. Turn the gas control valve to the 'Pilot' setting.
  2. Locate the reset button on your water heater (usually near the control valve) and press it to initiate the ignition sequence.
  3. Hold a long-handled lighter or match near the pilot burnerhole.

Lighting the Pilot Light

Once you've prepared your Rheem water heater, you're ready to light the pilot light. If your water heater has an ignition system (an electric spark that lights the pilot), proceed with the following steps. If it doesn't, you'll need to manually light the pilot using a long-handled lighter or match.

Ignition System: Electric Spark

If your Rheem water heater has an ignition system, use the following steps to light the pilot:

AD
  1. Press and hold the reset button while simultaneously pressing the ignition button.
  2. Continue holding both buttons until the pilot light is lit (usually around 60 seconds).
  3. Release both buttons and monitor the pilot light. If it stays lit, there's no need to adjust the KZ-1 screw.

Manual Lighting: Long-Handled Lighter or Match

For models without an ignition system, follow these steps to manually light the pilot:

  1. Turn the gas control valve to the 'Pilot' setting.
  2. Press and hold the reset button.
  3. Use your long-handled lighter or match to ignite the gas at the pilot burnerhole. Keep holding the reset button and the flame source until the pilot light is lit.
  4. Once the pilot is lit, continue holding the reset button for an additional 30-60 seconds to allow the thermocouple to heat up and stabilize the flame.
  5. Release the reset button and turn the gas control valve to the desired setting (usually 'On' or 'P' for continuous hot water).

Post-Lighting Check-Up

After successfully lighting the pilot, it's crucial to perform a quick check to ensure everything is functioning correctly:

  • Listen for the burner to ignite and confirm that hot water is flowing from your faucets.
  • Verify that the pilot flame indicator is lit and showing an orange or blue flame.
  • Check that the water heater's thermostat is set to your desired temperature ( typically between 120°F and 140°F).

If you've followed these steps and your Rheem water heater still isn't working as expected, don't hesitate to contact a licensed professional for assistance. Regular maintenance and understanding how your water heater works can help prevent inconvenient breakdowns and ensure your family has hot water when you need it.

AD

Now that you know how to light the pilot on your Rheem water heater, you can confidently tackle this task whenever you face a power outage or other temporary issues. Stay safe and enjoy the comfort of hot water in your home. Happy DIY-ing!

AD