how to fix stripped bike pedal

"Fixing Stripped Bike Pedals: Easy DIY Solutions"

By Sarah Davis
AD

Got a stripped bike pedal that's slipping and causing you grief? You're not alone. It's a common cycling conundrum, but don't let it deter you from enjoying your ride. In this guide, we'll walk you through a straightforward process to fix stripped bike pedals, ensuring your pedaling power is efficiently transferred to your bike's drivetrain. Let's dive right in!

Before we start, a quick note on safety. Make sure your bike is securely placed in a stand or held by a friend to avoid any potential accidents during the repair process. Now, let's tackle those stripped pedals!

Understanding Pedal Stripping and Tools

The most common cause of stripped bike pedals is overtightening, which can damage the pedal's threads, making them prone to stripping. Identifying the cause is essential to prevent future stripping. Now, let's gather our tools for the job. You'll need:

AD
Bike Pedals Won't Screw In?
Bike Pedals Won't Screw In?
Home Bike Repair Made Simple: How to Remove and Replace Bike Pedals
Home Bike Repair Made Simple: How to Remove and Replace Bike Pedals
How to Remove and Reinstall the Pedals on a Bicycle
How to Remove and Reinstall the Pedals on a Bicycle
  • Pedal wrench (usually included with your bike if it's new)
  • Grease (bike-specific grease, such as anti-seize, is ideal)
  • Small brush or rag

Identifying the Problem

First, identify whether your pedals are indeed stripped. Spin the pedals and check for play. If you notice excessive side-to-side movement or feel the pedal spinning loosely, then you have stripped threads. If it's minor, you can fix it. If it's severe, you might need to replace the pedal.

Check both the pedal's thread and the crank's thread. If the crank thread is stripped, you'll likely need to replace the entire crankset.

How To Remove Bike Pedals Without Pedal Wrench
How To Remove Bike Pedals Without Pedal Wrench
How to Fix a Bike Pedal That Fell Off | 5 Steps Solution (2026)
How to Fix a Bike Pedal That Fell Off | 5 Steps Solution (2026)

Removing Stripped Pedals

Start by releasing the pedal's tension with your wrench. Turn the pedal counterclockwise (loosening) until it's as loose as possible. Be wary of over-tightening in the future to avoid exacerbating the issue.

Once loose, you can unscrew the pedal from the crank arm by hand. If it's extremely tight, you might need to use the pedal wrench for extra leverage.

AD

Preventing Stripping and Reinstallation

Now that your striped pedal is off, let's prevent this from happening again. This involves correctly torquing your pedal and applying grease.

Applying Grease

Use a small brush or rag to apply a thin layer of grease to the pedal's thread. Grease reduces friction and helps maintain proper pedal tension. Avoid over-applying grease, as this can attract contaminants and negatively impact your pedal's performance.

Pro tip: Some cyclists prefer to use anti-seize grease, which can withstand higher temperatures and prevents seizing (but may require occasional reapplication).

AD

Reinstalling Pedals with the Correct Torque

With the pedal's thread greased, it's time to reinstall the pedal. Start by screwing the pedal on by hand until it's finger-tight. Then, use your pedal wrench to tighten the pedal. Most bike manufacturers recommend the following torques:

  • Left pedal (drives side): 35-55 Nm
  • Right pedal (non-driveside): 25-35 Nm

Be careful not to overtighten. Use a torque wrench if you have one, and if not, estimate based on hand feel.

Once tightened, give your pedal a few rotations to ensure it's spinning smoothly and without excessive play. If everything feels good, you're ready to hit the road!

AD

There you have it, folks! With these steps, you've successfully fixed stripped bike pedals and taken a significant stride towards maintaining your bike's performance. Happy cycling!

AD