how to fix a stripped bike pedal

"Revive Your Ride: Step-by-Step Guide to Repairing a Stripped Bike Pedal"

By Thomas Wilson
AD

Imagine the disappointment when, midway through your bike ride, you notice that your pedal won't engage or clicks unhappy-ly on every rotation. This is the plight of a stripped bike pedal, and it's a common issue that can happen due to excessive wear and tear, or even improper maintenance. But don't let it deter you from getting back on the road. In this guide, we'll walk you through the process of how to fix a stripped bike pedal, ensuring you're not saddle-bound for long.

Pedals, typically made of metal, withstand plenty of stress during cycling. They bear your weight and the force of each pedal stroke. When they wear out or strip, it's time for some repair action. So, before you call in the repair crew, try these steps at home. You might just save yourself some time and money.

Investigate the Damage

The first step is to understand what's causing your pedal to strip. Inspect both the pedal and the crank. This will reveal the extent of the problem and help you determine whether a simple fix or a complete replacement is necessary.

AD
Bike Pedals Won't Screw In?
Bike Pedals Won't Screw In?
Home Bike Repair Made Simple: How to Remove and Replace Bike Pedals
Home Bike Repair Made Simple: How to Remove and Replace Bike Pedals
How To Remove Pedals From A Bike?
How To Remove Pedals From A Bike?

Check for the following signs:

  • Excessive wear on the pedal threads
  • Rust or corrosion
  • Pedal won't tighten despite force
  • Loose pedal that wobbles

Gather Your Tools

Before you start the repair process, ensure you have all the required tools. You'll need:

How To Remove Bike Pedals Without Pedal Wrench
How To Remove Bike Pedals Without Pedal Wrench
How to Remove and Reinstall the Pedals on a Bicycle
How to Remove and Reinstall the Pedals on a Bicycle

1. A wrench size compatible with your pedal (usually a 15mm or 17mm for mountain bikes, and 8mm or 9mm for road bikes)
2. Grease or anti-seize compound
3. A pedal wrench or adjustable wrench
4. Optionally, a grinder, hammer, and chisel if the pedal is severely damaged

Loosen the Pedal

Using your wrench, loosen the pedal counterclockwise. If it's stripped, you might need to use some brute force or a socket wrench. If the crank arm is stripped, you might need to align the wrench with the pedal's threads or use a pedal extractor.

AD

Safety tip: Always secure your bike in a repair stand to prevent injury from an unbalanced or unstable bike.

Re-thread the Pedal

If the pedal threads are only slightly stripped, you can try re-threading them. This will help restore the pedal to its original state and prevent further stripping.

Clean the Pedal Threads

First, clean the pedal threads with a brush and some degreaser. This will remove any dirt, rust, or existing grease. Then, dry the pedal thoroughly with a cloth.

AD

Pro tip: If the threads are badly stripped, you might need to file them smooth and re-thread using a tap and die set.

Re-thread the Pedal

Once clean and dry, apply some grease or anti-seize compound onto the pedal threads. This will help protect against future stripping and make the pedal easier to remove in the future. Gently re-thread the pedal back onto the crank arm using hand force only, ensuring you don't further damage the threads.

Tighten the pedal as much as possible by hand, then use the wrench to give it a final tug. Be careful not to over-tighten, as this can strip the threads further.

AD

Replacement: When All Else Fails

If the pedal is severely stripped or won't re-thread, it's time for a replacement. This involves removing the crank arm, installing a new pedal, and reassembling the crank. It can be a complex process, but with patience and the right tools, it's doable.

Don't resign to abandoning your bike just yet. Many stripped pedal issues can be rectified at home. So, get your tools ready, roll up your sleeves, and tackle that bike repair. Soon, you'll be back on the road, pedaling with confidence.
Happy riding!

AD