how to fix a stripped faucet handle

Fixing a Stripped Faucet Handle: Easy Steps

By Joseph Davis
AD

Is there a stripped faucet handle in your home that's turning into a stubborn problem? You're not alone. Faucet handles that have been used for years can strip, making them hard to grip and even harder to repair. But don't let it stress you out. With the right tools and a little elbow grease, you can fix a stripped faucet handle like a pro. Let's dive into a comprehensive guide that will walk you through each step, ensuring your faucet handle is as good as new in no time.

Before we start, it's crucial to understand that faucet handles can strip either due to heavy usage or because of a faulty design. The good news is that both issues can be resolved with replacements and some simple fixes. Now, let's begin by gathering your tools and understanding the types of faucets you might be dealing with.

Understanding Your Faucet and Gathering Tools

A stripped faucet handle can be found on either compression or cartridge faucets. However, the repair process differs slightly based on the type of faucet. Therefore, it's essential to identify which type you have before starting the repair process.

AD
How to Fix a Stripped Faucet Handle – Step-by-Step Guide
How to Fix a Stripped Faucet Handle – Step-by-Step Guide
How to Fix a Stripped Faucet Handle in 10 Minutes or Less
How to Fix a Stripped Faucet Handle in 10 Minutes or Less
How to Fix Stripped Faucet Threads
How to Fix Stripped Faucet Threads

Compression faucets typically have two handles, one for hot water and one for cold. They use a washer to control water flow. On the other hand, cartridge faucets have a single handle that controls both hot and cold water flow. They usually have a lever that lifts and turns to control water flow. Familiarize yourself with your faucet to determine which type you're dealing with.

The tools you'll need for the job might vary slightly depending on your faucet's make and model. However, here's a list of common tools that should cover most repairs:

How To Fix Spinning Faucet Handle
How To Fix Spinning Faucet Handle
Fix a Dripping Faucet Yourself (Simple DIY)
Fix a Dripping Faucet Yourself (Simple DIY)
  • Adjustable wrench
  • Screwdriver ( Phillip's head or flathead, depending on your faucet's design)
  • Replacement handle set (ensure it matches your faucet's design)
  • Penetrating oil ( like WD-40 or PB B'laster)
  • White vinegar
  • Rubber or silicone faucet grease
  • Plumber's tape

Preparing for the Repair

Fixing a stripped faucet handle involves a series of steps that require precision and care. To ensure you're prepared, follow these initial steps:

  1. Turn off the water supply to the faucet. The incoming water line is usually located under the sink.
  2. Open the faucet to release any trapped water and pressure.
  3. Assemble your tools and have them within reach.

Now that you're ready, let's tackle the nitty-gritty of fixing that stripped handle.

AD

Fixing a Stripped Faucet Handle on a Compression Faucet

If your faucet is a compression faucet, follow these steps to fix the stripped handle:

  1. Remove the handle by unscrewing it from the stem using your screwdriver. If the handle is stripped, you may need to use an adjustable wrench to remove it.
  2. Using an adjustable wrench, loosen and remove the packing nut that secures the stem in place.
  3. Pull out the stem from the faucet. You might need to use pliers if it's stuck.
  4. Inspect the stem. If it's made of metal, it might be stripped internally, which means a replacement is needed. However, if it's plastic, you might be able to fix it by applying faucet grease or changing the washer.
  5. If the stem is plastic, remove the washer and replace it with a new one. Apply a small amount of faucet grease around the new washer before assembling the stem back into the faucet.
  6. Reassemble the faucet, ensuring the handle is securely attached, and the packing nut is tightened.
  7. Turn the water supply back on and test the faucet.

If the handle is still stripped, it might be time to replace it entirely.

Replacing a Stripped Faucet Handle on a Compression Faucet

If you've determined that your stripping issue is due to a faulty handle, replace it with a new one. Here's how:

AD
  1. Using your screwdriver or adjustable wrench, remove the old handle.
  2. Thread the screw from the new handle into the faucet stem. Hand-tighten it as much as you can.
  3. Use an adjustable wrench to snug the screw but be careful not to overtighten it.
  4. Test the new handle.

If the handle still feels stripped, you might need to replace the entire faucet.

Fixing a Stripped Faucet Handle on a Cartridge Faucet

Cartridge faucets are a bit more complex than compression faucets. However, with the right tools and a systematic approach, you can fix a stripped handle with ease. Here's how:

Fixing Internal Stripping

If the internal parts of the cartridge are stripped, you'll need to replace the entire cartridge. Here's how to do it:

AD
  1. Turn off the water supply and open the faucet to release pressure.
  2. Remove the handle by unscrewing it from the faucet.
  3. Remove the retaining clip that holds the cartridge in place.
  4. Gently tap the side of the faucet body to dislodge the cartridge. If it's stuck, use pliers to pull it out.
  5. Unscrew the cartridge from the water supply line.
  6. Replace the old cartridge with a new one, ensuring it's properly secured to the water supply line.
  7. Reassemble the faucet, replacing the retaining clip and the handle.
  8. Turn the water supply back on and test the faucet.

If the handle is still stripped, continue to the next section.

Fixing External Stripping on a Cartridge Faucet

If the handle is the one stripping out, replace it with a new one. Here's how:

  1. Remove the set screw at the base of the handle using a screwdriver or an adjustable wrench.
  2. Pull out the handle and the splines (arrow) from the faucet.
  3. Insert the new handle and splines. Ensure the arrows on the splines align correctly.
  4. Reinstall the set screw and secure it but don't overtighten it.
  5. Test the new handle.

If you've taken your faucet apart, cleaned it, replaced the necessary parts, and it's still not working correctly, it might be time to call a professional plumber.

However, before you make that call, let's discuss some maintenance tips that can help prevent stripped faucet handles in the future:

Maintaining Your Faucet Handles

  • Regularly clean your faucet handles to remove any mineral deposits or hard water buildup. Use white vinegar to soak the handles, which should help dissolve any buildup.

  • Apply silicone or rubber grease to the faucet stem regularly. This will not only extend the life of the stem but also preventstripping.

  • Gently tighten the set screw for your cartridge faucet. This will help prevent the handle from stripping and will also ensure that the connection remains tight.

  • If you notice that the handle is starting to feel loose or slippery, take action immediately. Tightening the set screw or applying grease can stop stripping before it begins.

By following these maintenance tips, you can extend the life of your faucet handles and prevent those pesky stripping issues.

Remember, fixing a stripped faucet handle is a breeze with the right tools and a systematic approach. With time, you'll become comfortable tackling more complex faucet repairs, saving you money and creating a sense of satisfaction that only DIY projects can offer. Happy fixing!

AD