how to wind husqvarna weed eater string

How to Wind Husqvarna Weed Eater String

By Joshua Moore
AD

Winding a Husqvarna weed eater string, also known as line, requires just a few simple steps, ensuring your tool's optimal performance. Here's a comprehensive guide on how to do this efficiently and safely.

Regularly winding your weed eater string keeps it from breaking and ensures efficient trimming. Follow these steps to master the process and maintain your Husqvarna weed eater in peak condition.

Preparing Your Weed Eater

The first step involves preparing your Husqvarna weed eater for winding. Check if the spool is empty, and ensure the trimmer head is correctly assembled.

AD
HOW TO STRING DOUBLE-HEADED WEED EATERS #shorts
HOW TO STRING DOUBLE-HEADED WEED EATERS #shorts
a man wearing sunglasses is holding an object in his hand and taking a picture with the phone
a man wearing sunglasses is holding an object in his hand and taking a picture with the phone
Easy Feed Nylon Head
Easy Feed Nylon Head

To begin, locate the release button on your weed eater's spool. This is usually a small, circular button that you press to release the line for winding.

Assessing the Spool

Inspect your spool to determine if it's designed for continuous loading or the 'bump and wind' method. The latter typically has a release button and clicks back to secure the line after each use.

HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
the instructions on how to use an electric grinder for cutting wood and other things
the instructions on how to use an electric grinder for cutting wood and other things

In case of continuous loading, ensure the spool can accommodate the entire length of the line. If not, you may need to adjust the length you're winding onto the spool.

Selecting the Correct Line

Choose the right type and thickness of line for your Husqvarna weed eater. Using a line that's too thick may cause the machine to overheat, while one that's too thin breaks easily. Always follow the manufacturer's guidelines.

AD

Most Husqvarna weed eaters use either .065" or .080" line, but always check your specific model's requirements.

Winding the String

Now that you've prepared the weed eater and selected the right line, it's time to wind the string onto the spool.

If your spool uses the 'bump and wind' method, winding is best done by another person or using a tool designed for this purpose, like a line-winding tool or a drill with a special adapter.

AD

Loading the Line

Start by inserting the line into the hole at the top of the spool. Leave enough line (about 10 inches) hanging out, then press the spool's release button to secure the line in place.

Keep your finger on the release button and start winding the line around the spool. Wind the line tightly and evenly, ensuring you create a neat, compact layer. Never overlap the line, as this can cause it to tangle and break during use.

Securing the Line

Once you've wound the desired amount of line (usually around 25 to 30 feet), it's time to secure it.

AD

At the end of the line, leave a small tail (about 6 inches), then gently release the spool's release button. This should allow the spool to spin freely, pulling the line tight and securing it in place.

If your weed eater uses the continuous loading method, you'll need to insert the line through the hole in the trimmer head and hold it in place while winding. Once all the line is wound, you can pull it tight to secure it.

Testing the Wound Line

Before using your weed eater, it's essential to test the wound line.

Gently pull on the line to ensure it's securely wound. You should feel resistance, indicating the line is wound tightly and won't unwind during use. If the line feels loose, you may need to wind it again.

Priming the Line

To ensure the line feeds correctly during use, you'll need to prime it. While holding the weed eater's trigger, gently pull the line out from the bottom of the trimmer head, releasing it when the line is fully extended. This primes the line, ready for use.

With the line primed, you're ready to use your Husqvarna weed eater. Just remember to rewind the line whenever it runs out or breaks.

Learning how to wind your Husqvarna weed eater string may seem daunting initially, but with practice, it becomes a quick and easy process. Keep your weed eater well-maintained with regular string changes, and it'll serve you well for years to come.

AD