how to wind dewalt weed eater

How to Wind Dewalt Weed Eater

By Anthony Davis
AD

Are you tired of your DEWALT weed eater losing its edge, quite literally? Winding the weed eater line might seem a daunting task, but with the right guide, it can become a breeze. This comprehensive guide walks you through the process, ensuring your DEWALT weed eater remains an efficient gardening tool.

Before we dive in, gathering the required tools is crucial. You'll need your DEWALT weed eater, some fresh line, a pair of scissors, and optionally, a winding key if your tool requires it. Let's get started!

Understanding Your DEWALT Weed Eater Head

Familiarize yourself with the head of your DEWALT weed eater. There are two main types of heads: bump-feed and fixed-line. Understanding your head type is crucial as the winding process varies.

AD
a close up of a person holding a hockey boot
a close up of a person holding a hockey boot
Dewalt 20v String Trimmer Problems? Here’s How To Fix Them Fast
Dewalt 20v String Trimmer Problems? Here’s How To Fix Them Fast
How to Change the String on a Dewalt 20v String Trimmer
How to Change the String on a Dewalt 20v String Trimmer

Bump-feed heads, as the name suggests, require you to 'bump' the head on the ground to release more line. Fixed-line heads, on the other hand, require you to manually adjust the line length.

Identifying Your DEWALT Weed Eater Model

Before you start, identify your DEWALT weed eater model. DEWALT's official website provides a wealth of information on individual models and their winding instructions. Ensure you're using the correct line type and size for your model.

Weedeater starts but dies. Easy quick fix.
Weedeater starts but dies. Easy quick fix.

For instance, the DEWALT DC080X1 and D20620HT cordless weed eaters use heavy-duty .080-inch (2.0mm) line. Other models, like the powerful DEWALT DCED990B, use .095-inch (2.4mm) line.

Preparing the Line for Winding

Measure out a sufficient length of line for winding. Typically, this is around 10-15 feet (3-4.6m) for most DEWALT models. Cut the line into two equal lengths. If your weed eater uses a spool, attach one end of the line to the spool.

AD

For bump-feed heads, you'll need to feed a certain length of line into the head to start. This length can vary, so consult your user manual or DEWALT's website for the correct amount. Then, bend the line in the middle to create a small hook for insertion.

Winding the DEWALT Weed Eater Line

Once you're familiar with your model and have prepared the line, it's time to wind. The following steps apply to both bump-feed and fixed-line heads. If there are specific instructions for your model, prioritize those.

First, unwind the old line if necessary. Some DEWALT models may require you to release the line holder or spool to do this. Once the old line is off, ensure the head is set to 'rewind' if your model has this feature.

AD

Winding with the Spool (Fixed-Line Heads)

Insert the line into the hole on the spool, pulling it through until the middle of the line is in place. Then, start winding the line around the spool in a clockwise direction, keeping the wind tight and neat.

Once the line is fully wound, secure the spool in place. Cut any excess line with scissors, leaving about 6-8 inches (15-20cm) for trimming. Snap the spool into place on your weed eater.

Winding with the Head (Bump-Feed Heads)

Feed the line hook into the hole on the top of the head. Unravel the line as you turn the head clockwise. If your head has a line cutter, make sure to use it correctly to prevent any accidents. If not, you can use the tool's protective cover to hold the line in place for cutting.

AD

Once the line is completely unraveled, feed it through the hole going into the line release mechanism. If your head has a winding keyhole, use a key to click the mechanism into the 'rewind' position. Then, wind the line around the head, ensuring it's tight and even.

Adjusting the Line Length (Fixed-Line Heads)

If you're using a fixed-line head, you'll need to adjust the line length before you start trimming. Rotate the head anti-clockwise to let out the desired length of line.

Remember, you should always have about 6-8 inches (15-20cm) of line extending from the cutting head. Any more, and you risk over-winding, which could lead to line breakage. Adjust the line length until it's right for your needs.

And there you have it! Your DEWALT weed eater is ready to tackle any weeds in its path. Don't forget to store your tool properly to keep it functioning at its best. Happy trimming!

AD