how to test small engine ignition coil with multimeter

Test Small Engine Ignition Coil with Multimeter: Simple Steps

By Daniel Moore
AD

When it comes to small engine maintenance, a faulty ignition coil can lead to a plethora of issues, from poor engine performance to complete failure. To confirm if your vehicle's ignition coil is guilty, you can perform a simple yet crucial test using a multimeter. This guide will walk you through the process, ensuring you can diagnose and replace the coil swiftly and accurately.

Before proceeding, ensure you have a multimeter in good working condition and the engine is cool to the touch. Safety first! Now, let's dive into the step-by-step process of testing a small engine ignition coil with a multimeter.

Understanding Ignition Coil Resistance

An ignition coil is essentially a transformer that steps up the voltage from the vehicle's electrical system, allowing for the production of high voltage sparks in the spark plugs. The coil's resistance is a vital indicator of its health. Here's what you need to know:

AD
How to Test an Ignition Coil with a Multimeter (7-Step Guide)
How to Test an Ignition Coil with a Multimeter (7-Step Guide)
How To Test And Troubleshoot Ignition Coils - Hunker
How To Test And Troubleshoot Ignition Coils - Hunker
Ignition Coil Testing with ohm meter for small engines - Briggs-Tecumseh - How To ~ UPDATED
Ignition Coil Testing with ohm meter for small engines - Briggs-Tecumseh - How To ~ UPDATED

1. A new or good ignition coil typically has a resistance of about 1-5 ohms.

2. If the resistance is zero or infinite, the coil is likely faulty and needs replacement.

Test Any Ignition Coil With A Multimeter! (Easy DIY Tutorial!)
Test Any Ignition Coil With A Multimeter! (Easy DIY Tutorial!)
Pro Tips for Cleaning a Lawn Mower Carburetor
Pro Tips for Cleaning a Lawn Mower Carburetor

Testing Ignition Coil Resistance

To test the resistance, follow these steps:

1. Set your multimeter to the ohms setting (typically marked with the Greek letter Omega (Ω)).

AD

2. Disconnect all the wires connected to the ignition coil.

3. Touch one probe of the multimeter to the positive terminal of the coil and the other probe to the negative terminal.

4. Record the reading. If it's within the 1-5 ohms range, your coil is likely functional. If it's significantly higher or lower, you may have a faulty coil.

AD

Testing Ignition Coil Spark Production Capability

While measuring resistance is a good starting point, it doesn't necessarily confirm that the coil can still produce a spark. To ensure this, you can test the coil's secondary winding directly.

1. Connect one probe of the multimeter to the center wire of the spark plug.

2. Hand-ground the other probe on the engine block near where the spark plug connects.

AD

3. Ask a helper to crank the engine as you observe the multimeter. You should see a voltage reading when the coil is inducing a spark.

4. A reading of around 10,000-20,000 volts indicates a functional coil. If there's no reading or it's significantly lower, the coil might be faulty.

Testing the Ignition Coil in the Engine

Before you remove the ignition coil from the vehicle, it's a good idea to test it while it's still connected. This can help you rule out other potential issues in the system, like problems with the wiring or the engine control unit (ECU).

1. Disconnect the electrical connectors from the ignition coil and the spark plugs.

2. Remove the spark plug wires from the plugs, then reconnect them to an automotive spark tester.

3. Crank the engine while observing the spark tester. A strong, blue spark indicates the coil is likely functional. If there's no spark or it's weak, further testing is needed.

Testing for Short Circuit and Open Circuit

Sometimes, an ignition coil can have an internal short or open circuit, both of which can cause problems with engine performance. You can test for these issues using the following steps:

1. Disconnect all the wires from the ignition coil.

2. Set your multimeter to the continuity setting.

3. Touch one probe to the positive terminal and the other to the negative. You should hear a beep if the coil is good. If not, there might be an open circuit.

4. To test for a short circuit, set the multimeter to the resistance setting and touch one probe to each terminal. If the reading is zero, there might be a short circuit.

Whichever test you perform, remember that interpreting the results requires a bit of engineering knowledge. Always refer to your vehicle's repair manual for specific resistance values and other particulars.

Finally, if you've diagnosed the ignition coil as faulty, don't hesitate to replace it – it's a small part that plays a significant role in your engine's performance. Regular checks and timely replacements will ensure your vehicle's small engine runs smoothly and efficiently. Happy wrenching!

AD