how to take apart lasko tower fan

How to Disassemble a Lasko Tower Fan

By Daniel Jones
AD

Tackling the task of dismantling your Lasko tower fan might seem daunting, but with the right steps and a patient approach, it can be a manageable and safe process. Whether you're planning to pack it for storage or need to access specific components for cleaning or repairs, taking apart your Lasko tower fan can be accomplished with the right guidance. Let's embark on this step-by-step journey to help you disassemble your Lasko tower fan efficiently and securely.

Before we begin, remember that safety should be your top priority. Unplug the fan from the power source, and allow it to cool down if it has recently been in use. Gather your tools - you'll likely need a Phillips-head screwdriver, a flathead screwdriver, and perhaps some needlenose pliers, depending on the model. Now that you're prepared, let's proceed with caution.

Assessing and Securing Your Lasko Tower Fan

First, ensure that your Lasko tower fan is sturdy and secure. Place it on a flat, stable surface to prevent it from wobbling or tipping during disassembly. If your fan has a remote control, it's wise to remove its batteries before proceeding to prevent any accidental commands.

AD
How to Clean a Tower Fan — The Family Handyman
How to Clean a Tower Fan — The Family Handyman
How To Clean a Tower Fan
How To Clean a Tower Fan
how to clean a lasko tower fan
how to clean a lasko tower fan

Accessing the Control Panel

The control panel is where you'll find most of the screws that hold your Lasko tower fan together. To access it, carefully tilt the fan back, exposing the panel at the front. The control panel is usually encased in a plastic molding that can be an obstacle. Using your flathead screwdriver, gently pry off this molding, starting from one of the corners. Work your way around the panel, applying steady but gentle pressure, to remove it completely.

the words how to clean a lasko tower fan on a yellow and white background
the words how to clean a lasko tower fan on a yellow and white background
Tower fan cleaning with leaf blower | Lasko fan cleaning
Tower fan cleaning with leaf blower | Lasko fan cleaning

Once the panel is off, you'll have a clear view of the screw layout. Make a mental note or take a picture of this layout, as you'll need to replicate it when reassembling your fan. Now, using your Phillips-head screwdriver, carefully remove these screws. Set them aside in a safe place, ensuring they're easily accessible for reassembly.

Dismantling the Base and Oscillation Motor

With the control panel removed, you should now have access to the base of your fan. The base is held together with screws, so use your Phillips-head screwdriver to remove these. Once you've removed the screws, gently lift the top portion of the base to separate it from the bottom part. Set aside the bottom portion, as you won't need to disassemble it further.

AD

The oscillation motor is located within the peeled-off base section. Carefully inspect the motor and its surrounding components. If you need to access the motor for cleaning or repairs, gently unplug its connector. Be prepared - the connector might require some force to disengage. If necessary, use a pair of needlenose pliers to help with the process.

Deconstructing the Foot pedal and Column

With the base and motor dismantled, it's time to tackle the foot pedal and column. The foot pedal is usually attached to the column with a spring-loaded mechanism. To release it, locate the screw that secures the pedal to the column. Remove this screw, and the pedal should pop off with a little coaxing. If the pedal remains stubborn, use a flathead screwdriver to pry it gently.

The column is the backbone of your Lasko tower fan, supporting the head and base. It's usually held together with screws, so use your Phillips-head screwdriver to remove these. After removing the screws, carefully extract the column's components. You might encounter some resistance when removing the top part of the column; this is normal, as the head assembly is often an interference fit. Gently ease it out, twisting a bit if necessary.

AD

Disassembling the Head Assembly

The head assembly houses the fan's blades and the motor that drives them. To disassemble it, you'll need to remove the screws that hold the front grill in place. Once the screws are out, gently pry the grill off. You might need to use a flathead screwdriver for this, applying steady force around the perimeter of the grill.

With the front grill removed, you should now see the fan blades and motor clearly. To remove the blades, first unplug the motor's connector. Then, using your hand or a pair of needlenose pliers, grip one of the blade's hubs and rotate it in a counter-clockwise direction. The blades should come off easily once they're disengaged from the motor. Set them aside carefully to prevent any damage.

Exploring the Internal Components

Now that the fan blades are removed, you can fully access the motor. If you need to clean the motor or any other internal components, now is the time to do so. Be cautious when handling these parts, ensuring that you don't cause any damage to delicate components. If you're unsure about any aspect of the cleaning process, it's best to consult the manufacturer's guidelines or seek professional help.

AD

After cleaning or making any necessary repairs, it's time to reassemble your Lasko tower fan. Start by reattaching the fan blades to the motor, ensure the connector is properly plugged in, and then rebuild each section following the same steps in reverse order. Remember to replicate the screw layout you noted earlier when reassembling the control panel.

And there you have it! Your Lasko tower fan is now fully disassembled and ready for repair, deep cleaning, or packing. As you embark on the reassembly process, take your time, refer back to these steps, and don't hesitate to consult your fan's user manual for model-specific guidance. Happy fan tinkering!

AD