how to take apart beats studio 3

How to Disassemble Beats Studio 3: A Step-by-Step Guide

By Michael Smith
AD

The art of taking apart electronics like the Beats Studio3 wireless headphones can be as satisfying as putting them back together. Not only does it teach you the inner workings, but it also helps you troubleshoot and perform basic maintenance. Here's a step-by-step guide on how to safely disassemble your Beats Studio3, ensuring you don't void your warranty and can reassemble it with confidence.

Safety first: Before you start, make sure to turn off and unplug your headphones. Also, prepare a workspace with good lighting and a tray or mat to hold your screws and components. Use an anti-static wristband to prevent static discharge. Having the right tools - a plastic opening tool for prying, a small flathead screwdriver, and tweezers - will make your task easier.

Unscrewing and Separating the Earcups

The first step is to detach the earcups from the headband.

AD
An Engineer Took Apart Some Beats By Dre Headphones And Says The Parts Cost £11
An Engineer Took Apart Some Beats By Dre Headphones And Says The Parts Cost £11
We Took Apart Some Beats Headphones And Here's What We Found
We Took Apart Some Beats Headphones And Here's What We Found
How to fix Solo HD speakers: What the inside of Beats solo HD looks like
How to fix Solo HD speakers: What the inside of Beats solo HD looks like

The Beats Studio3 has a Clayton-style hinge mechanism. To open it, locate the small hole on both earcups' underside. Insert a small flathead screwdriver and turn gently counterclockwise to unlock the hinge. Then, carefully pry off the earcup. Do this for both earcups.

Removing the Grille and Earpad

With one earcup removed, you'll see a grille protecting the speaker. You'll need to remove the earcup's dust cover and foam pad to access it.

How to Replace Broken Headband Part on Beats Solo 3 Wireless Headphones
How to Replace Broken Headband Part on Beats Solo 3 Wireless Headphones
How To Change Beats Ear Pads?
How To Change Beats Ear Pads?

Gently pull the earpad off the earcups using your fingers or the plastic opening tool. Once off, you'll see the speakers inside. You can set the earpads and grille aside - you don't need to remove them for most repairs.

Detaching the Headband

The headband connects to the earcups with a hinge and spring-loaded pins. To remove it, first disengage the pivot pins:

AD

Locate the small square cutouts on each side of the headband. Insert a small flathead screwdriver into these cutouts and push towards the center. You'll feel the pivot pop out. Do this for both sides. Now, the headband should slide off the earcups.

Accessing the Internal Components

With the headband removed, you can see the internal components of each earcup.

The inside panel of the earcup is held in place by clips. Use your plastic opening tool to gently pry these clips and release the panel. This will give you access to the internal circuit board, speaker, battery, and other components.

AD

Removing the Circuit Board

The circuit board is connected to the main body with several screws and a ribbon cable. Start by removing these screws using your small flathead screwdriver.

Once the screws are removed, carefully unplug the ribbon cable from the circuit board. If it's stuck, you may need to gently pull on the connector end rather than the wire. Now, the circuit board should lift off easily.

Extracting the Battery and Speaker

The battery and speaker are held in place with screws. Unscrew these to release both components.

AD

When reassembling, make sure to follow the order in reverse, placing the battery back first before the speaker. Be careful when handling these components; they're delicate and can be damaged if dropped.

Congratulations! You've successfully taken apart your Beats Studio3. Reassembling it is just as rewarding. Before you put it back together, take this chance to clean any dust and check for any damage. As you reassemble, double-check that each component went back in the correct position and remember to keep those screws organized. Once done, enjoy your Beats Studio3 with a newfound appreciation for its intricate design.

AD