how to take keurig apart

"Disassemble Your Keurig: Step-by-Step Guide"

By Jessica Martin
AD

When your Keurig coffee maker starts showing signs of wear and tear, such as slower brewing times or reduced water flow, it might be time for a little DIY maintenance. Knowing how to take your Keurig apart for a thorough clean or repair can extend the life of your coffee maker and save you money in the long run. The process is relatively straightforward, so grab a towel, a bowl, and your Phillips head screwdriver, and let's get started.

Before you begin, it's crucial to unplug your Keurig, empty any leftover water from the reservoir, and allow the machine to cool down. Safety first!

Preparation and Disassembly

The first step is to prep your workspace and gather your tools. You'll need a towel or mat to work on, a bowl to catch any water or coffee grounds, and a Phillips head screwdriver. You might also want to have some clean water, a soft-bristled brush, and white vinegar on hand for cleaning.

AD
Keurig Classic K50 Disassembly and Theory of Operation
Keurig Classic K50 Disassembly and Theory of Operation
What to do if Keurig isn't Turning On?
What to do if Keurig isn't Turning On?
How to Fix Keurig Coffee Maker
How to Fix Keurig Coffee Maker

Once you have everything ready, it's time to start taking your Keurig apart:

Separating the External Parts

Start by removing the drip tray and Keurig's needle. You can do this by lifting the drip tray out of the machine and unscrewing the needle from its holder. Set these aside in your bowl to keep them from getting lost or dirty.

How to Empty Keurig 2.0 Internal Tank: Every Possible Method You Need to Know
How to Empty Keurig 2.0 Internal Tank: Every Possible Method You Need to Know
How to fix a blocked keurig coffee machine - keurig not brewing a full cup - cleaning the needle
How to fix a blocked keurig coffee machine - keurig not brewing a full cup - cleaning the needle

Next, remove the water reservoir. Pull the reservoir out from the back of the machine, and set it aside. Be careful, as there may still be some water left inside.

Taking Apart the External Frame

Now that you've removed the external parts, it's time to take apart the frame of the Keurig. Start by removing the back panel. Use your screwdriver to unscrew the Phillips head screws on the back of the machine and set them aside.

AD

The back panel should now be loose. Carefully pull it off, revealing the internal components of your Keurig. Be gentle, as there are wires and other parts connected to the panel. Set the back panel aside with the screws.

With the back panel removed, you should now have a clear view of your Keurig's internal workings. Before you proceed, take a moment to familiarize yourself with the different parts, such as the pump, the heating element, and the needle assembly. This will help you understand how everything fits together and make the reassembly process easier.

Cleaning and Inspecting Your Keurig's Internal Components

With the internal parts exposed, it's time to give your Keurig a thorough clean and inspect the components for any signs of wear or damage:

AD

Cleaning the Needle and Exit Needle

The coffee exit needle and the entrance needle can both become clogged with coffee grounds and mineral deposits over time. To clean them, use a soft-bristled brush dipped in white vinegar to gently scrub away any buildup. Be careful not to bend or damage the needles.

If the needles continue to clog or leak after cleaning, it might be time to replace them. These are relatively inexpensive parts, and replacing them can restore your Keurig's performance.

Inspecting and Cleaning the Pump and Heating Element

The pump and heating element are crucial components of your Keurig. Inspect both for any signs of corrosion, damage, or excessive wear. If either part seems damaged, it's best to replace it, as they're not particularly expensive and can significantly impact your coffee maker's performance.

AD

After inspecting, use a clean, damp cloth to wipe down both components, removing any dirt or debris. Once you've finished, allow the internal parts to dry completely before proceeding with reassembly.

Now that you've cleaned and inspected your Keurig's internal components, it's time to put everything back together:

Reassembling Your Keurig

Reassembling your Keurig is the reverse of the disassembly process:

Reinstalling the Internal Components

Begin by reattaching the back panel. Make sure all wires are properly connected and then screw the panel back into place using the Phillips head screws you set aside earlier.

Next, reattach the water reservoir and needle. Screw the needle back into its holder and slide the reservoir back into place.

Reinstalling the External Parts

Finally, replace the drip tray and ensure the Keurig's needle is properly situated. Your Keurig is now reassembled and ready for use!

To test your Keurig, fill the water reservoir, plug in the machine, and brew a cup of coffee. If everything is working correctly, you should be rewarded with a perfect cup of coffee. If not, double-check your reassembly and consult Keurig's customer support for further assistance.

Regular maintenance and cleaning are essential for keeping your Keurig in top working order. By learning how to take your Keurig apart, you've gained the skills to perform basic repairs and cleanings, extending the life of your coffee maker and saving you money in the long run. Happy brewing!

AD