how to take apart a foosball table

How to Disassemble a Foosball Table: Step-by-Step Guide

By John Miller
AD

Are you a foosball enthusiast seeking to refurbish or repair your beloved table? Knowing how to take apart a foosball table is a valuable skill that allows you to access all parts for cleaning, maintenance, or replacement. This comprehensive guide will walk you through the disassembly process, ensuring your table is back in top-notch condition in no time.

Before diving in, gather your tools - you'll need a Phillips screwdriver, an adjustable wrench, and a pair of pliers. Safety first! Disconnect any power sources and remove the table from the wall before you start. Let's proceed.

Getting Started: Removing the Playing Field

The first step is to take off the playing field, or the table's top. This provides access to the internal components.

AD
25 Fun DIY Foosball Table Ideas for Your Game Room
25 Fun DIY Foosball Table Ideas for Your Game Room
DIY Foosball Table: Detailed Tutorial (with Plans)
DIY Foosball Table: Detailed Tutorial (with Plans)
Foosball Table DIY!
Foosball Table DIY!

Start by lifting the table to access its underside. Locate the screws holding the playing field in place. These are usually found along the edges or underneath. Use your Phillips screwdriver to remove them carefully, placing them aside for later use.

Removing the Glass or Plastic Playing Surface

Once the screws are out, gently lift the playing field off the table. Most foosball tables have a frame surrounding the glass or plastic playing surface. If the surface is stuck, use a flathead screwdriver to carefully pry it off.

How to Make a Foosball Table
How to Make a Foosball Table
the before and after shots of a foosball table
the before and after shots of a foosball table

Be mindful of the playing surface's condition; if it's cracked or warped, consider replacing it. You can purchase a new one at foosball supplies stores or online.

Disassembling the Man Myths and Rods

With the playing field removed, you'll see the men and rods are held in place by brackets. These brackets are secured with screws.

AD

Using your Phillips screwdriver, remove the screws holding the brackets. Once free, slide the brackets down the rods to fully expose the goal box area. Now, you can lift out the men and rods as a single unit. You might need to jiggle them slightly to get them loose.

Dismantling the Base and Legs

The base houses the internal mechanics and requires careful attention during disassembly.

Start by removing the screws securing the base to the legs. Using an adjustable wrench or pliers, loosen and remove the levelers and any other hardware that might be present, such as bolts or nuts.

AD

Separating the Base into Components

The base is typically made of two main parts: the bottom section and the top section that houses the mechanisms. Use your screwdriver to remove screws holding these two parts together. Keep track of where each type of screw came from, as not all screws are the same size or type.

Once loose, carefully separate the bottom and top sections. You might need to wiggle them slightly to dislodge them. Now you have access to the internal components, such as the bearings, bushings, and rods.

Disconnecting the Internal Components

For a thorough clean or repair, you'll need to disconnect the internal components. Start by removing the rods from the base. Use a pair of needle-nose pliers to gently lift the rods' plastic clips that hold them in place. Pull the rods out.

AD

Next, remove any bushings or bearings that might be stuck in the base. You can use a combination of pliers, screwdrivers, and your fingers to wiggled them out. Ensure you keep track of any small parts that come off.

Cleaning and Maintenance

With your foosball table taken apart, it's time for a thorough clean. Gently wipe down all components with a damp, lint-free cloth. For tougher grease or dirt, use warm soapy water, taking care not to damage any parts.

For the players, a quick scrub with a mild soap and cool water should do the trick. Ensure they're completely dry before reassembly. Additionally, check the internal mechanisms and replace any worn-out or damaged parts.

Reassembly 101

Saving the best for last, reassembly is a reverse of the disassembly process. Take your time, ensuring each component is properly secured and aligned. Reinstall the playing field and men last.

Before you know it, your foosball table will be as good as new. Enjoy those gaming tournaments once again!

Regular maintenance helps extend the life of your foosball table. Don't forget to lubricate the rods and bearings with a light silicone spray every few months. Happy gaming!

AD