Start Your Engelmann: A Beginner's Guide to Operating the STIHL MS170
Are you a homeowner or professional landscaper looking to tackle some serious yard work or felling? The STIHL MS170 is an excellent choice for its affordability and robust performance. But, like any chain saw, it requires careful operation to ensure safety and longevity. This guide will walk you through how to start your STIHL MS170, helping you get the best results possible while keeping you safe.
Before we dive into the starting process, ensure you have your STIHL MS170's manual nearby. While this guide provides general steps, your specific model may vary slightly. Also, make sure you're wearing appropriate safety gear, including hearing and eye protection, a hard hat, gloves, and sturdy boots.
Preparing Your STIHL MS170 for Startup
Before you attempt to start your STIHL MS170, take some time to prepare the saw. This will help ensure a smooth start and prolong your chain saw's life.
First, check the chain's tension. The STIHL MS170 comes with a chain tensioner that allows you to adjust the tension easily. Use this to tighten or loosen the chain as needed. An improperly tensioned chain can cause damage to the bar, chain, or engine, so it's crucial to get this right.
Fueling Your STIHL MS170
Next, fill the fuel tank with a high-quality, fresh fuel mix. Your STIHL MS170 requires a 50:1 gas-to-oil mixture. This ensures that the engine stays lubricated and reduces the risk of engine damage. Never useributary oil, as it can cause problems with your saw.
To mix the fuel, start by adding the appropriate amount of oil to a clean gas can or jug. Then, gradually pour in the gas, stirring continuously to ensure a thorough mix. Once you've reached the 50:1 ratio, your fuel is ready. Always store unused fuel mix in a sealed container away from heat and ignition sources.
Chain Lubrication
After filling the tank, lubricate the chain. The STIHL MS170 has an automatic chain oiler, which requires no action from you. However, it's essential to check the oil level and ensure it's set correctly. Consult your manual for proper setting instructions.
Once you've checked the oil level, it's time to pull the chain brake. This safety feature prevents the chain from turning when the saw is not in use. To pull the chain brake, lift the lever located on the rear handle until it clicks into place.
Starting Your STIHL MS170
Now that your STIHL MS170 is prepared, it's time to start it up. Before you begin, find a stable, level surface to operate the saw. Always hold the saw with both hands, ensuring your fingers are behind the front handle grips.
To start, follow these steps:
Prime the Saw
First, prime the saw to help ensure an easy start. The STIHL MS170 has a one-touch primer, which you can find on the left-hand side of the saw. Depress the primer button four to five times, until you feel resistance.
Set the Choke
Next, set the choke to 'full' by rotating the choke lever on the left-hand side of the saw. This enriches the fuel mixture, making it easier to start the saw in cold weather or when the engine is cold.
Pull the Starter Cord
Now, place your right hand on the starter grip and pull the starter cord slowly but firmly until the engine begins to turn over. Be careful not to yank the cord, as this can cause damage to the engine.
Start the Saw
Once the engine begins to turn over, release the choke by rotating the choke lever back to the 'run' position. Then, pull the starter cord again, this time more firmly and quickly, to start the saw. If the saw starts, allow it to warm up for a few minutes before operating it.
If the saw does not start on the first attempt, repeat the process, ensuring you give the engine a few seconds to rest between pulls. If after several attempts the saw still won't start, double-check that you've followed all the steps correctly and that the saw is in good working condition.
Warming Up the Saw
Once your STIHL MS170 is running, allow it to warm up for a few minutes before using it. This helps ensure optimal performance and reduces the risk of engine damage. During the warm-up period, keep the saw on the ground and let the chain make contact with the ground or a log to prevent overheating.
As the saw warms up, you'll notice the idle speed increase. Once the idle speed stabilizes, your STIHL MS170 is ready for use. Always follow safe operating procedures when using your chain saw, keeping in mind the safety guidelines provided in your manual.
In the end, mastering how to start your STIHL MS170 is just the beginning of your journey with this powerful tool. With proper maintenance and safe operation, your chain saw will serve you well for years to come. So, go ahead and tackle that yard work or felling project with confidence, knowing you've got the power and knowledge to handle it safely and effectively.