"Easy Start: Beginner's Guide to Starting Your Stihl Chainsaw"
Starting a STIHL Easy2Start chainsaw can be a breeze once you understand the process. Equipped with an advanced starting mechanism, these saws are designed to reduce starting force by up to 40% compared to traditional chainsaws. Here's a step-by-step guide to help you start your STIHL Easy2Start chainsaw safely and efficiently.
Before diving into the starting process, ensure your chainsaw is well-maintained and in good condition. Always check the chain tension, fuel level, and the operation of the chain brake. Now, let's get to the heart of this guide: starting your STIHL Easy2Start chainsaw.
Getting Ready to Start
The first step is to ensure your chainsaw is in the correct position. For safety and easy starting, hold the saw with the rear handle on the ground, supported by your foot. This will provide stability and allow you to apply the necessary starting force efficiently.
Next, place your left hand on the rear handle and your right hand on the starter rope. Make sure to stand with your feet shoulder-width apart for balanced support.
Preparing the Engine
Before pulling the starter rope, it's crucial to put the chainsaw's engine in the 'ON' position. Look for the ON/OFF switch, usually near the rear handle, and turn it to the 'ON' position. This readies the chainsaw for starting.
If your chainsaw has a decompression valve, engage it now. This valve helps reduce the compression in the cylinder, making the starting process smoother. Typically, you'll find this valve near the air filter or the engine oil fill hole.
Setting the Choke
STIHL Easy2Start chainsaws come with an automatic choke system. In cold weather, you'll notice the choke knob is in the 'CHOKED' position. In normal operating temperatures, the choke knob should be in the 'RUN' position.
For cold starts, ensure the choke knob is in the 'CHOKED' position. For warm starts, set the choke knob to the 'RUN' position. Always double-check the choke setting before pulling the starter rope to prevent flooding the engine.
Starting the Chainsaw
Now that your chainsaw is prepared, it's time to start the engine. With the chainsaw securely positioned and your hands correctly placed, it's time to pull the starter rope.
Apply a firm, smooth pull on the starter rope. Since the Easy2Start mechanism reduces the pull force, you should feel a lighter starting effort compared to traditional chainsaws. Continue pulling the rope until the engine fires up.
Clearing the Choke
Once the engine has started and is running smoothly, it's time to return the choke knob to the 'RUN' position. Be cautious not to switch the choke knob too early, as this can cause the engine to stall.
Watch the engine closely. After about 10-15 seconds, set the choke to the 'RUN' position. If the engine starts to splutter or stall, quickly return the choke knob to the 'CHOKED' position until the engine stabilizes again.
Warming Up the Engine
After starting the chainsaw, allow the engine to warm up for about 30 seconds before operating it at full throttle. Warming up the engine ensures proper lubrication and helps the tool reach its optimal operating temperature.
Throughout the warming-up process, keep an eye on the engine's speed. If it fluctuates or slows down excessively, it might indicate that the choke has been left on too long, causing the engine to flood. If this happens, switch off the chainsaw, allow it to cool, and restart the process.
Congratulations! You've now successfully started your STIHL Easy2Start chainsaw. Always remember to follow safety guidelines when operating your chainsaw, including wearing appropriate protective gear and maintaining your tool regularly. Happy sawing!