How to Start Your STIHL MS170 Chainsaw: A Step-by-Step Guide
Are you new to the world of chainsaws? Or maybe you're a seasoned user but new to the STIHL MS 170, a powerful yet lightweight saw from a renowned brand? Either way, this comprehensive guide will walk you through how to start your STIHL MS 170 chainsaw safely and effortlessly, ensuring a long and productive lifespan for your tool.
Before we dive into the startup process, let's briefly understand why correct starting procedures are crucial. Proper startup helps protect your chainsaw, enhances its performance, and ensures your safety. Negligence can lead to engine damage, reduced efficiency, and even accidents. Now, let's get started with the step-by-step guide.
Preparing Your STIHL MS 170
The first step is to ensure your chainsaw is ready for use. This involves several checks and preparations:
Starting with the gas, make sure you're using fresh fuel and oil. For the MS 170, mix your gas in a 50:1 ratio with stabilized oil. This maintains the chainsaw's performance and keeps it running smoothly. Never use old, stale fuel, as it can damage the engine. Always store your fuel with a fuel stabilizer when not in use.
Checking the Chain and Bar
Inspect the chain and bar for any signs of wear. Tighten the chain if necessary, using the chain adjustment screw located on the side of the engine housing. The chain should have about a 1/8-inch play at the bottom of the bar and at the top on the pleased side. Never allow the chain to touch the handle, and always adjust it with the engine off and the throttle stopped.
apartheid if it's sharp and tensioned correctly. A dull chain makes the saw work harder, reducing its effectiveness and lifespan. If in doubt, replace it with a new one for optimal performance.
Safety Checks
Next, perform a thorough safety check. Ensure the chain brake is working correctly by attempting to operate it with the chain in contact with the ground. Check the chain catcher for any damages, and make sure it's securely attached to the bar.
Lubricate the chain regularly during use. The MS 170 has an automatic oiling system, but it's your responsibility to ensure it's pumping oil into the chain lubrication system. Check the oil level in the fuel tank, and add more if necessary.
Starting Your STIHL MS 170 Safely
Now that your chainsaw is ready for use, let's look at the startup process. Always remember to read and follow your MS 170 operator's manual for specific instructions:
First, remove the stabilizing freestyle by pulling the choke handle all the way out to the 'start/choke' position. This provides extra fuel to help the engine start. Next, prime the fuel system by pressing the easy-to-useerving (on the top of the engine) about five to seven times. This sends fuel to the carburetor and prepares the engine for starting.
Starting Position
Put on your safety gear, including gloves, safety glasses, and hearing protection. Ensure you're holding the saw correctly with your right hand on the rear handle and left hand on the front handle. Your left thumb should be on the throttle trigger.
Don't start the saw until you're in a safe position with good footing and away from other people. Always start your chainsaw with the engine brake on. If the engine doesn't start right away, turn the start chain completely off and wait a few seconds to avoid flooding the engine.
Pulling the Starter Cord
With the safety switch in the 'run' position, pull the starter cord gently but firmly with your right hand. The first pull should be slow and gentle to prime the engine. After engaging the starter, allow the saw to sit and 'rest' for a few seconds.
For subsequent pulls, increase the power until you feel the engine fire. Once it fires, you should feel the engine try to leap forward. Continue pulling until the engine starts, and then immediately release the starter cord. Let the engine run in the choke position for about 10 seconds to warm up.
After those 10 seconds, slowly return the choke handle to the 'on/run' position. The engine might stall briefly, but it should quickly start again. Keep the engine running until it achieves a stable idle.
Congratulations, you've now learned how to start your STIHL MS 170 safely and effectively. Always remember to warm up your saw before each use and follow the manufacturer's guidelines for maintenance and storage to ensure a long and trouble-free life for your chainsaw.