How to Start Your STIHL MS250 Chainsaw: A Step-by-Step Guide
The Stihl MS250 is a powerful, versatile chainsaw designed for a wide range of tasks, from limbing and bucking to felling and firewood processing. If you're new to Stihl chainsaws or new to operating a chainsaw entirely, you've come to the right place. Here's a comprehensive guide on how to start your Stihl MS250, ensuring safety and proper operation.
Before diving into the starting process, let's quickly cover some safety basics. Always wear appropriate personal protective equipment (PPE), including a helmet with a face shield or safety glasses, ear protection, gloves, and sturdy work boots. Keep your body away from the chainsaw's kickback zone, and never operate the chainsaw with the engine running unless it's on the ground or supported by a stake.
Preparing the Stihl MS250
Before you start your MS250, ensure it's in good working condition. Regular maintenance is crucial for the longevity of your chainsaw.
A quick check of the chain tension, the airing filter, and the fuel and oil levels will save you time and frustration. Your MS250 should have a sufficient amount of pistaolin in the chain oil reservoir and unleaded fuel in the tank. Always use Stihl's recommended oil and fuel for optimal performance.
Checking the Chain Tension
The chain should 'float' about 1/8" above the bar when lifted off the guide rail. Tension your chain according to these guidelines, and never operate your MS250 with a loose or overly tense chain.
To adjust the chain tension, turn the reaches adjuster screw either clockwise to tighten or counterclockwise to loosen. Once you've achieved the correct tension, secure the adjusting screws with locking nuts.
Inspecting the Air Filter
A clean air filter ensures your MS250's engine stays in tip-top shape. Inspect the air filter before each use, cleaning or replacing it as needed. The air filter is located on the left side of the engine and can be accessed by removing the cover.
If the filter is dirty, clean it using warm water and a mild detergent, avoiding strong cleaning agents. Rinsing the filter thoroughly and allowing it to air-dry completely is crucial before reinstalling it. If the filter paper tears or loses its shape, dispose of it and install a new one.
Starting the Stihl MS250
Now that your MS250 is in top shape, it's time to start it. Follow these steps, and you'll be ready to tackle your cutting tasks safely.
Begin by preparing your worksite, ensuring there are no obstructions around the cutting area. Next, always approach the chainsaw with the rear handle first, placing your left hand on the rear handle and your right hand on the front handle. This ensures you maintain full control over the chainsaw during starting and operation.
Setting the Choke Lever
The choke lever helps enrich the fuel mixture to ensure an easy start when the engine is cold. Set the choke lever to the 'CHOKED' position or 'START' position. For warm engines, you can start in the 'RUN' position without engaging the choke.
Once the engine starts and warms up, release the choke lever to the 'RUN' position for normal operation. Always keep the choke lever closed when carrying the chainsaw or during transport to prevent fuel leakage.
Starting the MS250
To start your MS250, follow these steps: 1. **Prime the chainsaw**: If the engine is cold, prime the fuel bulb three to five times to deliver fuel directly to the carburetor. If the engine is warm, priming is not necessary. 2. **Pull the starter rope gently**: With the front and rear hand guards in place, pull the starter rope outwards slowly and smoothly until you feel some resistance. This engages the centrifugal clutch. 3. **Pull firmly and swiftly**: Once you feel resistance, pull the starter rope firmly and swiftly to start the engine. Release the rope halfway through the pull to minimize the risk of strain or injury. 4. **Allow the engine to warm up**: After starting, let the engine run for a few seconds to allow it to warm up. Once warmed, gradually increase the throttle speed to the optimal RPM range for your cutting task.
Congratulations! You've successfully started your Stihl MS250. Always follow safety guidelines and maintain your chainsaw consistently to ensure trouble-free operation and a long lifespan. Happy cutting!