how to start a snowblower with a choke

How to Start a Snowblower with a Choke

By Ashley Smith
AD

Imagine you're the first to wake up to a winter wonderland – the weight of snow on your driveway is too heavy for a shovel, but no worries, you have a snowblower! However, to get it started, you'll need to know how to use the choke. Here's a comprehensive guide to help you start your snowblower with a choke like a pro.

Before we dive in, ensure your snowblower is properly fueled, and the fuel is fresh. If it's been a while since you last used it, you might need to stabilize the fuel to prevent gelling in cold temperatures.

Understanding the Choke: What and Why

The choke is a small lever on your snowblower that limits the airflow to the engine. It's like a temporary stop-gap for your engine; while it's engaged, the engine's fuel-to-air ratio is richer, making it easier to start the engine when it's cold outside.

AD
How to Start a Snowblower Easily: Step-by-Step Beginner Guide
How to Start a Snowblower Easily: Step-by-Step Beginner Guide
How to Start a Snowblower That Has Been Sitting
How to Start a Snowblower That Has Been Sitting
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start)
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start)

The choke isn't meant for regular use – it's specifically for cold starts. In fact, leaving the choke on while operating the snowblower can lead to excessive fuel consumption and even engine damage. So, let's see how to use it correctly.

Preparing for a Cold Start

Before starting your snowblower, check that the fuel valve is open, and the fuel primer bulb (if your snowblower has one) is fully depressed. Then, move the choke lever to the 'Choke' or 'Full' position. This tells the engine that you want extra fuel for a cold start.

Tips On Troubleshooting Snowblowers
Tips On Troubleshooting Snowblowers
How to Start a Snowblower Engine
How to Start a Snowblower Engine

Now, you're ready for the next step: giving your snowblower the start signal.

Starting the Snowblower

To start your snowblower, pull the recoil starter cord gently but firmly. You should see the engine turn over, but it might not catch right away. This is normal, especially in cold temperatures. Don't yank the cord too hard, though, as this could cause damage.

AD

After a few attempts, the engine should catch and begin to run. If it doesn't, allow the engine to rest for a few minutes before trying again. Once the snowblower is running, you can move on to the final step.

The Choke's Role in Warm-Up and Operation

Now that your snowblower is running, it's time to warm it up. Let it run for a few minutes, allowing it to reach its optimum operating temperature. As it warms up, you'll notice the engine sounds become more stable.

Once warmed up, it's time to move the choke lever into the 'Run' or 'Open' position. This position allows normal air intake, promising more efficient and cleaner operation.

AD

Warm-Up Complete: Engage the Drive

With the choke in the 'Run' position, you're ready to engage the drive system and start clearing snow. Make sure to keep the snowblower moving constantly, as letting it stay idle can cause the engine to stall or lead to snow building up and clogging the auger.

Always keep an eye on your snowblower's operation and make adjustments as necessary. If you notice any irregularities or strange noises, stop the engine immediately for a check-up.

Remember, using the choke correctly can significantly improve your snowblower's performance and longevity. Next time you're up against a heavy snowfall, you'll be ready to tackle it with ease. Happy snowblowing!

AD
AD