"Reviving Vintage Pwrs: Quick Guide to Start an Old Snowblower on Gas"
Starting your snowblower with old gas can be a challenging task, but with the right steps and a bit of patience, you can have your machine running smoothly in no time. Understanding the unique needs of older gas and proper snowblower maintenance is key to a successful start.
Before we dive into how to start your snowblower with old gas, let's clarify what we mean by 'old' gas. In this context, 'old' refers to gas that's been sitting in your snowblower for more than 30 days. The finer points of gas depreciation will be discussed later, but for now, let's focus on how to start your snowblower.
Preparing Your Snowblower and Gas
The first step in starting your snowblower with old gas is to prepare both your machine and the fuel. This involves checking your snowblower's condition and treating your old gas.
First, inspect your snowblower for any signs of damage or wear. Check the tires, belts, and auger for any cracks or breaks. If everything checks out, move on to your old gas. Pour a fuel stabilizer into your gas tank to prevent the gas from breaking down any further.
Understanding Gas Depreciation
Gas starts to degrade as soon as it's made. Within 30 days, it loses its volatility, or ability to burn effectively. The longer gas sits, the more it develops gum and varnish, which can clog your snowblower's carburetor and fuel lines. This is why it's recommended to use fresh gas in your snowblower.
However, if you've stored your snowblower with old gas, don't panic. With a bit of preparation and some know-how, you can still start your snowblower. Firstly, try to use gas that's only been sitting for up to two months. After that, the risk of engine damage increases significantly.
Treating Old Gas
To treat your old gas, you have two options: use a fuel stabilizer or add fresh gas. As mentioned earlier, a fuel stabilizer respects the chemical composition of your old gas, preventing it from breaking down further. This treatment should be applied at the start of the snow season and every 30 days thereafter.
The other option is to add fresh gas to your old fuel. This method dilutes the old gas, but it doesn't preserve it. It's a quick fix for old gas but isn't a long-term solution. If you choose this method, try to use no more than a 50/50 ratio of old to fresh gas.
Starting Your Snowblower
Now that your snowblower and gas are prepared, let's move on to starting your machine. The process varies slightly between single-stage and dual-stage snowblowers, but the principles remain the same.
Firstly, make sure your snowblower is on a flat, stable surface. Then, follow these steps:
- Pull the choke out to the 'closed' position.
- Prime the fuel line several times using the primer bulb. This injects fresh gas into your carburetor.
- Turn the ignition to the 'start' position and hold the start lever until the engine catches.
- Once the engine starts, push the choke back in to allow fresh air into the engine.
Single-Stage Snowblower
For single-stage snowblowers, you'll likely need to pull the recoil starter cord several times to get it started. Be sure to pull the cord gently but firmly to avoid injury.
If your snowblower still won't start, try pushing the choke back in and pulling the cord again. If it still doesn't start, let it rest for a few minutes before trying again to avoid flooding the engine.
Dual-Stage Snowblower
Dual-stage snowblowers typically have an electric starter. If the engine doesn't catch with one pull, try again. If it still doesn't start, check your engine's oil levels and ensure your spark plug is in good condition.
If your snowblower still isn't starting, you may need to take it to a professional for service. It could be a sign of a bigger problem, such as a faulty fuel pump or carburetor.
Finally, always remember to drain your snowblower's fuel tank at the end of the snow season to avoid old gas problems next year. Regular maintenance will also help keep your snowblower running smoothly for years to come.