how to reset generac generator after oil change

Reset Generac Generator After Oil Change: Step-by-Step Guide

By Mark Harris
AD

Generac generators are reliable power sources that ensure your home or business stays functional even during power outages. Regular oil changes are crucial for maintaining their performance and longevity. After an oil change, it's essential to reset the generator to avoid any potential issues and ensure optimal operation. Here's a step-by-step guide on how to reset your Generac generator after an oil change.

Before proceeding, ensure that the generator is cool and the oil has had adequate time to settle. This usually takes about 24 hours after the oil change.

Preparing the Generac Generator for Reset

Before resetting, you'll need to prepare your generator by following these steps:

AD
Complete Generator Maintenance Guide for Better Performance & Longer Life
Complete Generator Maintenance Guide for Better Performance & Longer Life
How Often Do You Need To Change The Oil In Your Generator?
How Often Do You Need To Change The Oil In Your Generator?
12 Ways To Reduce Generator Noise
12 Ways To Reduce Generator Noise

1. **Check the Oil Level**: After the oil change, double-check that the oil level is within the recommended range.

2. **Inspect the Air Filter**: Ensure the air filter is clean. If it's clogged, replace it to maintain optimal engine performance.

Facebook
Facebook
Generator Fuel Guide: Gas, Propane, or Diesel?
Generator Fuel Guide: Gas, Propane, or Diesel?

Locating the Reset Button

Generac generators from different models may have the reset button in varying locations. However, you can usually find it on the control panel or near the engine.

3. **Identify the Reset Button**: On most models, the reset button is red and labeled "Reset" or "Reset/Oil Change." If you're unsure, refer to your generator's user manual.

AD

Resetting the Generator's Hours Meter

The hours meter on your Generac generator tracks the total runtime. Resetting it after an oil change will ensure accurate tracking of usage.

4. **Press and Hold the Reset Button**: With the generator turned off, locate the reset button. Press and hold it for about 5-10 seconds.

5. **Release the Button**: Once the hours meter reads "00," release the button. The generator has now been reset.

AD

Restarting the Generac Generator

After resetting, you'll need to start your generator to ensure everything is functioning correctly.

6. **Turn the Fuel Valve to the "On" Position**: Ensure the fuel valve is turned to the "On" position to supply fuel to the engine.

Priming the Fuel System

Priming the fuel system helps ensure consistent start-ups and prevents air pockets in the fuel line.

AD

7. **Prime the System**: Using the primer bulb located near the fuel line, squeeze it 5-10 times. This will prime the fuel system.

8. **Start the Generator**: Once primed, try starting the generator. If it starts without any issues, congratulations! Your Generac generator has been successfully reset after the oil change.

Performing a Test Run

After resetting, it's always a good idea to perform a test run to ensure the generator is working correctly.

9. **Perform a Test Run**: Allow the generator to run for about 15-30 minutes. Monitor it closely to ensure it's functioning as expected and no error codes appear on the control panel.

And there you have it! By following these steps, you've successfully reset your Generac generator after an oil change. Regular maintenance, including oil changes and resets, is crucial for keeping your generator running smoothly and extending its lifespan. Always remember to consult your generator's user manual for specific instructions related to your model. Until next time, happy generating!

AD