how to change oil on generac generator

How to Change Oil on Generac Generator: Step-by-Step Guide

By David White
AD

Regular maintenance is crucial to ensure the longevity and optimal performance of your Generac generator. One of the most important tasks is changing the oil, as it lubricates the generator's engine and helps prevent wear and tear. Here's a step-by-step guide on how to change the oil on your Generac generator.

Before we dive into the process, gather all the necessary tools and materials: a wrench, an oil filter wrench, an oil drain pan, new oil (check your manufacturer's guidelines for the correct type and amount), a new oil filter, a funnel, and gloves to protect your hands. It's also a good idea to have a shop towel or rags on hand for cleanup.

Preparing Your Generator

Before you start, ensure your generator is on a level surface and has cooled down for at least 30 minutes after running to prevent oil leaks.

AD
How to Change the Oil in a 22KW Generac Generator - Generac Maintenance - Generac Air Filter Change
How to Change the Oil in a 22KW Generac Generator - Generac Maintenance - Generac Air Filter Change
Complete Generator Maintenance Guide for Better Performance & Longer Life
Complete Generator Maintenance Guide for Better Performance & Longer Life
How Often Do You Need To Change The Oil In Your Generator?
How Often Do You Need To Change The Oil In Your Generator?

Disconnect the spark plug wire from the spark plug to prevent the engine from starting-up unexpectedly. Remove the engine oil fill cap and dipstick to access the oil pan below.

Draining the Old Oil

Position your oil drain pan underneath the oil pan on your generator's engine. Using a wrench, loosen and remove the oil pan drain plug. Allow the oil to completely drain into the drain pan. This may take a few minutes, so be patient.

Oil change 20kva Generac for my cousin
Oil change 20kva Generac for my cousin
What Is The Best Oil For An Onan Generator? [Inc. 4000 & 5500 Models]
What Is The Best Oil For An Onan Generator? [Inc. 4000 & 5500 Models]

Once the oil has finished draining, wipe the area with a shop towel to remove any residual oil. Replace and tighten the oil pan drain plug. Remember not to overtighten, as this can cause the plug to strip or crack.

Replacing the Oil Filter

Remove the oil filter by turning it counterclockwise with an oil filter wrench. It may help to use a strap wrench if the oil filter is particularly tight. Once removed, discard the old oil filter. It's a good idea to check the manufacturer's instructions at this point, as some may recommend replacing the oil filter every other oil change.

AD

Prepare the new oil filter by lightly coating the gasket with fresh motor oil. This helps create a better seal. Screw on the new oil filter by hand, turning it only quarter to halfway to ensure a proper seal. Again, consult your manufacturer's instructions for the correct torque specifications.

Adding Fresh Oil

Using a funnel, slowly pour the recommended amount and type of fresh motor oil into the engine through the opening where the oil cap is located. Check the manufacturer's guidelines for the exact amount, but typically it's around 4-5 quarts for a Generac generator.

Once you've finished adding the oil, replace the oil fill cap and dipstick. After running your generator for a short period (around 15-20 seconds), allow it to sit for a few minutes to allow the oil to settle. Check the oil level using the dipstick, adding more oil if necessary to maintain the full mark.

AD

Post-Oil Change Checks and Maintenance

Reconnect the spark plug wire. Run your generator for a few minutes, allowing the new oil to circulate. Turn off the generator and let it cool for about 30 minutes. Check for any leaks around the oil pan and oil filter.

Inspect the oil level once more after it has settled. It's not uncommon for the oil level to decrease slightly after the first start-up, so top it off if necessary. Regularly checking and changing your Generac generator's oil is key to maintaining its performance and extending its lifespan.

Don't forget to properly dispose of the used oil and oil filter according to your local regulations. Many auto parts stores accept used oil and filters for recycling. With a little routine maintenance, your Generac generator will continue to provide reliable power when you need it most.

AD
AD