how to reset oil change on jeep wrangler jk

Reset Oil Change Jeep Wrangler JK: Step-by-Step Guide

By Daniel Miller
AD

So, you own a rugged and reliable Jeep Wrangler JK, and it's that time again to reset the oil change light. Don't worry; it's an easy process that you can DIY. Here's a comprehensive guide on how to reset the oil change light on your Jeep Wrangler JK.

Before we dive into the reset process, it's essential to understand the importance of regular oil changes. They keep your engine running smoothly, improve fuel efficiency, and prolong the life of your vehicle. Now, let's get started! Remember, always follow the vehicle's manufacturer guidelines for the best results.

Preparation

Before you begin, ensure your Jeep Wrangler JK is parked on a level surface and the engine is cool to the touch. Gather your tools: a wrench (usually 10mm or 13mm depending on your vehicle's model year), an oil filter (if you're changing it), new oil (check your owner's manual for the recommended type and amount), and a funnel.

AD
Why Is My Jeep Wrangler Leaking Oil?Explained!
Why Is My Jeep Wrangler Leaking Oil?Explained!
How to Change the Oil in your 3.6L V6 Jeep Wrangler JL or Jeep Gladiator JT
How to Change the Oil in your 3.6L V6 Jeep Wrangler JL or Jeep Gladiator JT
How to change the oil in a Jeep Wrangler 2011-2015
How to change the oil in a Jeep Wrangler 2011-2015

For a complete oil change, you'll also need an oil drain pan, gloves, and rags to clean up any spills. Once you've gathered everything, you're ready to proceed.

Accessing the Oil Dipstick and Fill Hole

Locate the oil fill hole on the driver's side of the engine. It's under the hood, beneath a black cap, and is marked with an oil can symbol. Remove the cap. Next, find the oil dipstick on the opposite side of the engine. It's usually a yellow or orange handle with a loop at the end, near the bottom of the engine.

How To Reset Oil Change Monitor - Change Oil Soon - Jeep JK Wrangler
How To Reset Oil Change Monitor - Change Oil Soon - Jeep JK Wrangler
How to Reset the Change Oil Light on an 2007-Current Jeep Wrangler Unlimited JK
How to Reset the Change Oil Light on an 2007-Current Jeep Wrangler Unlimited JK

Pull out the dipstick, wipe it off with a rag or shop towel, and reinsert it completely. Pull it out again and check the oil level. The ideal level is between 'FULL' and the crossed circle (indicating the dipstick's lowest point). If the oil level is correct, proceed with the reset process. If not, you may need to add oil or perform an oil change.

Resetting the Oil Change Light

Now that you've checked your oil level, it's time to reset the oil change light on your Jeep Wrangler JK. The process varies slightly depending on the model year. We'll cover vehicles from 2007 to 2018, as the procedure is similar for 1997-2006 models as well.

AD

First, ensure your vehicle is in 'Park' (or 'P') and turn the ignition to the 'ON' position without starting the engine. This should make the 'CHECK ENGINE' and 'OIL CHANGE' lights illuminate on the dashboard.

For 2007-2011 Jeep Wrangler JK Models

Press and hold both the trip odometer reset button (usually near the speedometer) and the trip fuel reset button (often beside the odometer) simultaneously for about 10 seconds. Then, release the buttons. The 'OIL CHANGE' light should turn off. If it doesn't, turn the ignition off, wait for about 10 seconds, and repeat the process.

Once the light is off, start the engine and let it run for about a minute. Turn the engine off and wait for another minute. Finally, start the engine again, and the 'OIL CHANGE' light should remain off. If the light doesn't reset, consult a professional mechanic for assistance.

AD

For 2012-2018 Jeep Wrangler JK Models

Press the 'OIL CHANGE' button on the left side of the speedometer (if equipped). If your vehicle doesn't have a dedicated 'OIL CHANGE' button, use the trip odometer reset button and the trip fuel reset button method described above.

Press and hold the button (or both buttons) for about 10 seconds, then release them. The 'OIL CHANGE' light should turn off. If it doesn't, turn the ignition off, wait for about 10 seconds, and repeat the process. After resetting the light, start the engine and let it run for about a minute. Turn the engine off and wait for another minute. Finally, start the engine again, and the 'OIL CHANGE' light should remain off.

Congratulations! You've successfully reset the oil change light on your Jeep Wrangler JK. Regular oil changes and light resets will help maintain your vehicle's reliability and performance. Always refer to your owner's manual for maintenance schedules and specific recommendations. Happy driving!

AD
AD