how to replace toilet tank lever

Quick Fix: How to Replace Your Toilet Tank Lever

By David White
AD

Have you found that your toilet's lever isn't lifting the tank's fill valve as it should? It may be time to replace your toilet tank lever. This task might seem daunting, but with the right steps and a little patience, you can tackle this yourself. Let's guide you through the process, making sure to use simple, easy-to-understand language, so you can complete this task with confidence.

Before we dive in, remember that safety is paramount when working with any type of plumbing. Always turn off the water supply to your toilet before starting any maintenance work. Now, let's get started with the step-by-step process of replacing your toilet tank lever.

Understanding Your Toilet Tank

First, let's familiarize yourself with your toilet tank's components. Understanding how the lever, fill valve, and flush valve work together is key to a successful repair. The lever, when lifted, permits water to flow into the bowl, initiating the flush. Once the water level reaches the appropriate height, the fill valve opens, allowing water to refill the tank.

AD
How to Replace a Broken Toilet Flush Lever
How to Replace a Broken Toilet Flush Lever
Replacing A Toilet Flush Lever in 3 Quick And Easy Steps — TruBuild Construction
Replacing A Toilet Flush Lever in 3 Quick And Easy Steps — TruBuild Construction
{diy with style} Getting Playful with a New Toilet Lever
{diy with style} Getting Playful with a New Toilet Lever

In this section, we'll dive into the two most common types of toilet fill valves: diaphragm fill valves and float arm fill valves. Knowing which type you have will help you choose the correct replacement lever.

Diaphragm Fill Valves

Diaphragm fill valves use a rubber diaphragm to control water flow. The lever is connected to a rod that moves the diaphragm up and down. When you lift the lever, the diaphragm opens, allowing water to enter the tank. These are typically found in older toilets.

How to Upgrade Toilet Flush Levers
How to Upgrade Toilet Flush Levers
Install Toilet Handle Lever - How to Change Flush Lever on Toilet - YouTube
Install Toilet Handle Lever - How to Change Flush Lever on Toilet - YouTube

To determine if you have a diaphragm fill valve, look at the end of the lever. If it's connected to a rod that goes down into the tank, you have a diaphragm fill valve. Also, when you lift the lever, you should hear a diaphragm make a 'schlurping' sound as it opens.

Float Arm Fill Valves

Float arm fill valves, on the other hand, use a float arm to control water flow. When you lift the lever, the float arm rises, opening the water supply and allowing water to enter the tank. These are more common in newer toilets.

AD

To identify a float arm fill valve, look for a float arm attached to the top of the lever. When you lift the lever, you should hear the water supply open, and the float arm should rise with the water level in the tank.

Removing the Old Lever

Once you've identified your fill valve type, it's time to remove the old lever. Start by turning off the water supply to your toilet. This is typically located behind the toilet, near the floor, and is controlled by a shutoff valve.

Next, flush the toilet to empty the tank. This will provide you with easier access to the lever. Now, locate thenut that secures the lever to the tank. This is usually a brass nut located on the inside of the tank, near the top of the lever.

AD

Removing the Nut

The nut may be corroded and difficult to remove. If this is the case, you might need to use penetrating oil to loosen it up. Apply the oil around the nut, wait a few minutes, then try to turn the nut with a wrench. If it's still too tight, you can use a hacksaw to cut the nut off, making sure not to damage the tank.

Once the nut is removed, the lever should come out easily. If it's stuck, you can try tapping it gently with a hammer to break the seal and allow it to move. If the lever is still stuck, you may need to drill a small hole in the tangetion of the lever to break the seal, and then use a pair of pliers to pull the lever out.

Cleaning the Tank

Before installing the new lever, it's a good idea to clean the inside of the tank. This will help ensure proper operation of the new lever and prevent any debris from causing issues. You can use a cup or bowl to scoop out any sediment from the bottom of the tank, and a cloth or sponge to wipe away any dirt or grime from the sides.

AD

Also, inspect the tank for any cracks or damage. If you find any, you may need to replace the entire tank, as repairs are not always possible or reliable. Once the tank is clean and dry, you're ready to install the new lever.

Installing the New Lever

Before you begin, make sure you've purchased the correct replacement lever for your fill valve type. The new lever should look similar to the old one, just in better condition.

First, insert the new lever through the hole in the tank where the old lever was removed. The side of the lever with the chain or rod should be on the inside of the tank.

Attaching the Chain or Rod

For diaphragm fill valves, attach the chain to the flush valve at the bottom of the tank. For float arm fill valves, attach the float arm to the lever, ensuring that the float arm will rise as the water level in the tank decreases.

Make sure the chain or rod is the correct length. If it's too long, it can tangle or catch on things, causing the lever to malfunction. If it's too short, it won't allow the flush valve to close completely, leading to leaks. A good rule of thumb is to attach the chain so that when the lever is in the down position, there's about 1/2 inch of play in the chain.

Securing the Lever

With the chain or rod attached, secure the lever to the tank with the provided washer and nut. Tighten the nut by hand as much as you can, then use a wrench to tighten it another 1/4 to 1/2 of a turn. Be careful not to overtighten, as this can strip the threads or damage the tank.

Now, turn the water supply back on and flush the toilet a few times to ensure that the new lever is working properly. The tank should fill with water and the lever should lift easily. If the tank doesn't fill or the lever doesn't lift, you may need to make adjustments to the chain or rod length, or the position of the lever.

There you have it! You've successfully replaced your toilet tank lever. Now you can enjoy a functional toilet and the satisfaction of having completed a task that many assume requires a plumber. If you've experienced any issues during this process, don't hesitate to consult a professional. Until next time, keep your home in top shape with confidence.

AD