how to replace flush lever on toilet

How to Replace a Toilet Flush Lever: Step-by-Step Guide

By David Rodriguez
AD

Is your toilet lever broken or worn out? Don't worry, replacing it is a relatively straightforward DIY task that can save you the trouble and expense of hiring a professional. In this guide, we'll walk you through the process, from gathering your tools to ensuring your new flush lever works perfectly.

Before we dive into the steps, let's briefly discuss why you might need to replace your flush lever. Over time, this part can become loose, break, or simply wear out, leading to inefficiencies in your toilet's flushing mechanism. Additionally, a broken lever can be unsightly and pose a safety risk, particularly in households with small children or elderly individuals.

Preparation: Gathering Tools and Materials

Before you begin, it's crucial to have the right tools and materials on hand to ensure a smooth process. You'll need:

AD
Replacing A Toilet Flush Lever in 3 Quick And Easy Steps — TruBuild Construction
Replacing A Toilet Flush Lever in 3 Quick And Easy Steps — TruBuild Construction
Install Toilet Handle Lever - How to Change Flush Lever on Toilet - YouTube
Install Toilet Handle Lever - How to Change Flush Lever on Toilet - YouTube
toilet repairs part 1 - replacing the lever
toilet repairs part 1 - replacing the lever
  • New flush lever assembly (ensure it's compatible with your toilet model)
  • Adjustable wrench
  • Flathead screwdriver
  • Rubber gloves
  • Optional: penetrating oil, if your bolts are rusted

Note that the tools may vary slightly depending on your toilet's make and model.

Understanding Your Toilet's Flush Mechanism

Before replacing the lever, it's essential to understand how your toilet's flush mechanism works. Most toilets use a similar system, consisting of a large lever or handle at the top of the tank, which is connected to a chain or rod. This chain or rod is attached to the flapper at the bottom of the tank. When you lift the lever, it pulls up the flapper, allowing water to flow into the bowl from the tank, thereby flushing it.

a person is fixing the handle on a water heater
a person is fixing the handle on a water heater
How to repair and replace toilet bowl flush handle / flush lever DIY tutorial
How to repair and replace toilet bowl flush handle / flush lever DIY tutorial

Knowledge of this mechanism will help you understand why it's important to measure the chain length during the replacement process to maintain the toilet's functionality.

Removing the Old Flush Lever

Now that you're familiar with the flush mechanism and have your tools ready, it's time to remove the old flush lever.

AD

Turning Off the Water Supply

First, locate the water supply valve behind the toilet. Typically, it's a round or square knob on the wall or the supply line near the floor. Turn it clockwise to shut off the water supply. If it's too stiff, apply a small amount of penetrating oil to help loosen it.

Draining the Tank

Next, flush the toilet to drain the tank. Hold down the handle until the tank empties completely. Be careful, as the last bit of water may be dirty and contain sediment.

Once emptied, use a towel or sponge to dry the inside of the tank. This will make it easier to see and work with the internal components.

AD

Removing the Old Lever

Locate the mounting screws that secure the flush lever to the tank. They're usually on the side or top of the tank. Use a flathead screwdriver to remove these screws.

If the screws are rusted, you might need to use an adjustable wrench to gently twist and loosen them without stripping the heads. Once the screws are out, the old flush lever should be free and can be removed from the tank.

Installing the New Flush Lever

With the old lever out of the way, it's time to install the new one.

AD

Measuring the Chain Length

Before you attach the new lever, you'll need to measure the length of the chain connected to the flapper at the bottom of the tank. This chain determines when the flapper closes, so it's crucial to get it right.

When you lift the lever, the chain should have some slack, but not too much. Ideally, you want about an inch or so of slack at the highest point of the lever's travel. Use this measurement to help you adjust the chain length on the new flush lever.

Attaching the New Lever

Now that you have the correct chain length, attach the new flush lever to the tank using the mounting screws. Make sure the lever is securely attached and aligned properly. Tighten the screws evenly to prevent any wobbling.

Test the Flush Mechanism

Before turning the water supply back on, it's a good idea to test the flush mechanism to ensure everything is working correctly. Lift the new flush lever and watch the flapper at the bottom of the tank. It should rise and allow water to flow into the bowl. When you release the lever, the flapper should drop closed, and the tank should start filling with water again.

Reconnecting the Water Supply and Finale

If the flush mechanism is working correctly, turn the water supply valve counterclockwise to restore the water supply. Check that water is flowing into the tank and filling it as expected.

And there you have it! With these steps, you've successfully replaced the flush lever on your toilet. Regular maintenance, like this, can extend the lifespan of your toilet and keep it in good working order. If you encounter any issues or aren't comfortable performing this task, don't hesitate to call a professional. Ensuring your toilet is in top shape not only improves your home's hygiene but also adds value to your property.

AD