how to replace the pull cord on a snowblower

How to Replace Your Snowblower's Pull Cord

By Jessica White
AD

Winter's chill brings with it the necessity to tend to our snow-clearing equipment. If your snowblower has seen better days and its pull cord has become frayed or snapped, it's time to replace it. This guide walks you through the process to ensure your snowblower is ready for the next snowstorm. We'll cover gathering the necessary materials, disconnecting the old cord, inserting the new one, and ensuring it's firmly in place. Let's dive into the step-by-step process.

Ensure you have the right materials before you start. You'll need a replacement pull cord, preferably one designed for your specific snowblower model, though universal options are alsoavailable. Additionally, you may need a screwdriver to access thend part, and a pair of pliers to help guide the new cord through the reel.

Gather Your Materials and Prepare the Workspace

Before you begin, ensure you have all the necessary materials and a clear workspace. A clutter-free area allows you to easily see and access all the components you'll be working with. This may seem like an obvious step, but a tidy workspace can significantly reduce the risk of losing small parts and simplify the replacement process.

AD
How to Repair a Pull Cord on a Snowblower
How to Repair a Pull Cord on a Snowblower
how to replace the snow blower pull cord on your car's engine?
how to replace the snow blower pull cord on your car's engine?
Snowblower Pull Cord Repair - video
Snowblower Pull Cord Repair - video

Next, consult your snowblower's owner's manual for any specific insights into the replacement process. Though this guide provides general steps, your specific snowblower may require slight variations. Always prioritize safety and follow the manufacturer's guidelines.

Understand the Cord's Path

A snowblower's pull cord typically travels through a series of channels and around pulleys. It attaches to the crankshaft at one end and loops through a handle at the other. Understanding this path saves you time and frustration as you'll know exactly where the cord should go as you install the new one.

Snowblower Pull Cord Repair - video
Snowblower Pull Cord Repair - video
How to Replace a Snowblower Pull Cord – Easy DIY Rope Fix
How to Replace a Snowblower Pull Cord – Easy DIY Rope Fix

Begin by familiarizing yourself with the cord's existing path. Identify the starting point, the route it takes, and its termination point. This will serve as a reference as you install the new cord.

Disconnect the Old Cord

Before you remove the old cord, take a few moments to inspect it closely. This can help you understand why it failed and what to look for when choosing a replacement. If it's frayed, that might be indicative of normal wear and tear. If it's cut or looks unevenly worn, you may need to address any underlying issues before installing the new cord.
Start by removing any covers or panels that can hinder your access to the old cord. You may need to use a screwdriver to remove screws or a pry tool to carefully dislodge panels. Be cautious not to damage any components while removing these parts.

AD

Once you've accessed the old cord, grasp it firmly with pliers and pull it gently but steadily. The cord should give way, and you should be able to pull it out completely. If it doesn't seem to be moving, you may need to locate and disconnect any locking mechanisms or clips that hold the cord in place.

Insert the New Pull Cord

The process of inserting the new pull cord is essentially the reverse of removing the old one. Begin by ensuring the new cord is the correct length and matches your snowblower's original cord. Then, feed the new cord through the smallest hole and follow the path taken by the old cord.
At each junction, make sure that the cord goes around the pulleys and through any guides. It's crucial to ensure the cord is properly aligned to prevent any kinks or tangles that could cause damage or result in a stuck pull cord.

Inserting the new cord through the crankshaft can be a bit challenging. If you're having trouble, use a hook made from a coat hanger or a bent wire to guide the cord through. Once the cord is securely attached to the crankshaft, carefully pull it all the way through to ensure it's firmly in place. There should be no slack in the cord, and it should move freely and smoothly.

AD

Attach the Cord to the Reel

With the new cord securely fastened to the crankshaft, your next task is to attach it to the tension pulley, also known as the reel. The reel helps to maintain the correct tension on the pull cord, ensuring it pulls evenly and smoothly.
Locate the reel on your snowblower. This is typically found close to the crankshaft, near the bottom of the engine. Disengage any safety catches or locking mechanisms that are preventing you from accessing or turning the reel. Once you've done that, pull the cord through the slot in the reel and wrap it around the reel's circumference several times.

Ensure the cord is wrapped tightly and evenly. This helps distribute the tension across the cord and prevents it from slipping or loosening. After you've wrapped the cord around the reel, hold the loose end in place and turn the reel to test the tension. The cord should pull smoothly with a consistent amount of pressure. If it feels too tight or too loose, adjust the cord's position on the reel until you achieve the correct tension.

Test the New Cord

Before you reassemble your snowblower and call it a day, it's crucial to test the new cord. This will give you peace of mind knowing that your snowblower is ready for the next snowfall.
Start by pulling the cord firmly and steadily. It should engage the starter motor and turn over comfortably. If it feels too stiff or isn't pulling smoothly, double-check your work and ensure the cord is properly tensioned and wound around the reel.

AD

After a few successful pulls, let the snowblower sit for a few minutes. Then, try starting it again. The cord should perform just as well on the second attempt. If you notice any issues, such as the cord feeling weaker or not engaging the starter motor, you may need to adjust the tension or inspect your work for any potential problems.

With your new pull cord securely in place, you can confidently face the upcoming winter knowing your snowblower is ready for action. Always remember to keep your snowblower well-maintained, checking components regularly to prevent any potential issues and ensure your snowblower stays in top working condition. Happy snowblowing!

AD