how to replace strut springs

How to Replace Strut Springs

By Daniel Johnson
AD

Replacing strut springs may seem like a daunting task, but with the right equipment and a comprehensive guide, it's a viable DIY project. Strut springs support the weight of your vehicle, and replacing them ensures optimal suspension and handling. Here's a step-by-step guide to help you replace strut springs.

Firstly, ensure you have the appropriate equipment and expertise. You'll need a jack, jack stands, new strut springs, a pry bar, a socket wrench, penetrating oil, and some basic mechanical skills.

Determine Which Strut Springs to Replace

Before starting, identify which strut springs need replacement. Inspect your vehicle's front and rear ends for excessive bouncing, poor handling, or unusual noises. Check the springs visually for wear and tear, and ensure you purchase the correct replacement parts for your vehicle make and model.

AD
How to Install Gas Struts for Cabinet Doors - Easy DIY Guide
How to Install Gas Struts for Cabinet Doors - Easy DIY Guide
VEVOR MacPherson Strut Spring Compressor Review / Replacing Insulator Boot (Scion tC2 / tC2.5)
VEVOR MacPherson Strut Spring Compressor Review / Replacing Insulator Boot (Scion tC2 / tC2.5)
Torn strut boot: Does it need immediate replacement?
Torn strut boot: Does it need immediate replacement?

You can also check if your vehicle is due for a strut spring replacement according to its mileage and service history. Regularly maintained vehicles typically require this service between 60,000 to 100,000 miles, but this varies depending on driving conditions and vehicle type.

Front Strut Springs

Front strut springs carry a significant load, so it's crucial to replace them safely and correctly. First, consult your vehicle manual for specific instructions, as the process may vary slightly between makes and models. Typically, the process involves the following steps:

Coil Spring Compressor Safety - RallyWays
Coil Spring Compressor Safety - RallyWays
Curbside Maintenance: The Mystery Car Gets New Struts - It Was Time And Then Some - Curbside Classic
Curbside Maintenance: The Mystery Car Gets New Struts - It Was Time And Then Some - Curbside Classic
  1. Use a jack to lift the vehicle and secure it on jack stands.
  2. Remove the wheel and tire assembly.
  3. Drain the used strut assembly of any excess power steering fluid or oil.
  4. Remove the bolts securing the strut to the vehicle's frame.
  5. Pry the old strut spring out using a pry bar.
  6. Position the new strut spring and secure it with bolts.
  7. Reassemble the tire and wheel, ensuring proper tire balance and alignment.

Rear Strut Springs

Rear strut springs play a crucial role in maintaining wheel balance and preventing premature tire wear. Here's a general process to replace them:

  1. Jack up the vehicle and secure it on jack stands.
  2. Remove the wheel and tire assembly to access the strut.
  3. Remove the bolts securing the strut spring to the vehicle's frame.
  4. Using a pry bar, carefully extract the old spring from the strut assembly.
  5. Insert the new strut spring and secure it with bolts.
  6. Replace the tire and wheel, ensuring proper inflation and balance.

Safety Checks and Inspections

After replacing the strut springs, perform a series of safety checks before returning to the road. Inspect the newly installed struts for any signs of damage or wear, and ensure all bolts are properly secured.

AD

Test drive your vehicle on a smooth, flat surface to assess its handling and response. Monitor its performance, and make any necessary adjustments or further service arrangements. Consult your mechanic if you're unsure about any aspect of the process.

Regular strut spring replacement is essential for optimal vehicle performance and safety. By following this comprehensive guide, you can replace strut springs confidently and independently. Always prioritize safety during the process, and consult professional assistance if needed. Happy wrenching!

AD