Replacing Recliner Springs: A Step-by-Step Guide
Tired of your recliner not reclining as it once did? Or perhaps it's maker only and only that way. Replacing worn-out springs can revitalize your chair and ensure it remains a comfortable go-to spot in your home. Here's a step-by-step guide to help you navigate this DIY project.
Before you begin, ensure you've gathered all necessary tools and materials. You'll need screwdrivers, gloves, a spring compressor, heavy-duty socks or a large plastic bag, replacement springs, and potentially tie wraps or zip ties for securing new springs.
Understanding Your Recliner Springs
Recliner springs come in various types, including extension, compression, and bias springs. Understanding the type in your recliner is key to choosing the right replacement. Typically, extension and compression springs are used for the backrest, while bias springs are for the footrest.
Inspect your current springs. Extension springs are stretched out, compression springs are coiled tightly, and bias springs look like a 'C' or 'S' when flat. Take note of their size, length, and style to ensure you purchase the correct replacements.
Safety First and Disassembly
Before diving in, ensure your recliner is unplugged if it's electric and move it to a well-lit, clutter-free workspace. Disassembly requires patience and careful handling of small parts. Use a screwdrivers to remove all screws holding the recliner together. Be sure to keep track of where each screw came from for easy reassembly later.
Remove the backrest and footrest from the main frame, if possible. Some recliners might not allow complete disassembly, so check the manufacturer's guidelines if available. Once disassembled, put all the parts and screws in a safe place where they won't get lost.
Removing the Old Springs
Now that your recliner is disassembled, locate the springs. They might be found under the fabric at the backrest and/or footrest. If your recliner has compression or extension springs, use a spring compressor to slowly release the tension. This is a safety step that prevents the spring from rebounding and causing injury.
Once the tension is released, remove the spring from its mounting point. If your recliner has bias springs, they may be secured with additional hardware. Remove these carefully to avoid losing small parts. Place the removed springs in a secure, out-of-the-way location.
Installing the New Springs
Now that the old springs are out, it's time to install the new ones. Start by ensuring your new springs match the old ones in size, style, and potentially tension. If the new springs are shorter or different in some way, you may need to adjust the recliner frame or mechanism.
With your new springs ready, begin by attaching one end securely to the frame. Use tie wraps or zip ties if necessary to hold the spring in place while you secure the other end. Once both ends are securely attached, ensure the spring is functioning correctly by testing the backrest or footrest gently.
Reassembling the Recliner
With the new springs in place, it's time to reassemble your recliner. Start by reattaching the backrest and footrest to the main frame using the screws you removed earlier. Make sure everything is lined up correctly and the mechanism is functioning as it should.
Once the main parts are reattached, test the recliner by gently rocking the backrest and using the footrest. Ensure the reclining function works smoothly and that there are no snags or issues. If everything feels good and functions well, replace the outer fabric covering if necessary and give your recliner a final once-over.
Congratulations! You've successfully replaced your recliner springs. Enjoy the comfort and support of your newly revitalized chair for many years to come.