how to replace battery in chevy malibu key fob

Step-by-Step Guide: Replacing Your Chevy Malibu Key Fob Battery

By Andrew Williams
AD

Tired of your Chevy Malibu's key fob not working? Don't let a dead battery keep you from where you need to go. Replacing the battery in your key fob is a straightforward task that you can do at home. Let's dive into a step-by-step guide on how to replace the battery in your Chevy Malibu key fob.

The process is simple and only requires a few tools. By the end of this guide, you'll be back on the road in no time. So, grab your new battery and let's get started.

Gathering Your Tools and the New Battery

Before you begin, ensure you have all the necessary tools and the correct battery for your Chevy Malibu key fob.

AD
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet
How to Change the Battery in Chevrolet Key Fob | Chevy Traverse #keyfob #battery #chevrolet
Chevrolet Malibu How To Change Smart Key Fob Battery 2016 To 2024 9th Gen With Part Number
Chevrolet Malibu How To Change Smart Key Fob Battery 2016 To 2024 9th Gen With Part Number
2016 - 2024 Chevy Malibu Key Fob Battery Replacement - How To Replace Change Malibu Remote Batteries
2016 - 2024 Chevy Malibu Key Fob Battery Replacement - How To Replace Change Malibu Remote Batteries

You will need:

  • A new CR2032 coin cell battery
  • A flathead screwdriver
  • Tweezers (optional, for handling the small battery)

Choosing the Right Battery

Chevy Malibu key fobs use a CR2032 coin cell battery. These batteries are 20 millimeters in diameter and 3.2 millimeters thick. Make sure to buy a battery with this exact size and specifications to ensure a proper fit.

Chevrolet Malibu Key Fob Battery Replacement (1997 - 2005)
Chevrolet Malibu Key Fob Battery Replacement (1997 - 2005)
How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob

Always buy a high-quality battery from a reputable brand to ensure longevity and reliability. Avoid cheap, no-name batteries as they might not last as long or may not fit properly.

Removing the Old Battery

Now that you have all the necessary tools and the new battery, it's time to remove the old battery from your key fob.

AD

Start by removing the back cover of your key fob. There should be a small indentation or slot that allows you to insert a flathead screwdriver.

Using the Screwdriver to Remove the Back Cover

Gently insert the flathead screwdriver into the indentation. Twist the screwdriver slightly to pry the back cover off. Be careful not to pry too hard or you might break the plastic.

The back cover should pop off easily. Once it's off, you'll see the battery compartment. The old battery may be stuck in place. If so, use the tweezers to gently pull it out. Be careful not to bend the battery or cause any damage to the circuit board.

AD

Preparing the New Battery

Before inserting the new battery, make sure to check its polarity. The positive side of the battery is marked with a "+" sign. Ensure that the positive side faces up when you insert the battery into the key fob.

If the battery has no marking, the positive side is usually the flat side. The concave side is the negative side.

Inserting the New Battery

The battery compartment in your Chevy Malibu key fob should be clearly marked with a "+" sign, indicating where the positive side of the battery should go.

AD

Carefully line up the battery with the compartment, making sure the positive side faces up. Gently press down on the battery until it snaps into place.

Testing the New Battery

Once the new battery is in place, try testing your key fob. Press the lock and unlock buttons to make sure they're working properly.

If your Chevy Malibu has a push-button start, try starting your car to ensure the new battery is functioning correctly with your vehicle's systems.

Reassembling the Key Fob

With the new battery installed and tested, it's time to put the key fob back together.

Line up the back cover with the main body of the key fob. There should be small alignment marks to help you fit the cover back onto the key fob. Press down firmly and evenly until the cover snaps back into place.

That's it! You've successfully replaced the battery in your Chevy Malibu key fob. You should now be able to lock, unlock, and start your car without any issues.

Regularly checking your key fob's battery life is essential to prevent unexpected malfunctions. If you notice that your key fob is not working as it should, it might be time to replace the battery again.

Now that you're back on the road with a working key fob, don't forget to keep an extra CR2032 battery in your car for future replacements. Happy driving!

AD