how to replace gameboy advance cartridge battery

Replacing Gameboy Advance Cartridge Battery: Step-by-Step Guide

By Michael Lopez
AD

It's a common issue that many gaming enthusiasts face: their Game Boy Advance (GBA) cartridge won't save games due to a worn-out battery. But don't worry, replacing the battery is a straightforward process that anyone can manage with the right tools and guidance. We're here to walk you through the steps to replace your GBA cartridge battery.

First, let's understand why the battery needs replacing. The GBA uses a CR2032 coin cell battery, which is a rechargeable lithium coin cell. Over time, these batteries lose their charge-holding capability and may need to be replaced. By replacing the battery, you can restore your GBA's ability to save games and settings.

Gathering Your Tools and Materials

Before you begin, make sure you have all the necessary tools and materials.

AD
Replacing Game Boy Advance Cartridge Battery (solderless)
Replacing Game Boy Advance Cartridge Battery (solderless)
How To Repair Faulty/Glitchy GameBoy Advance Cartridges!
How To Repair Faulty/Glitchy GameBoy Advance Cartridges!
someone is holding the motherboard in their hand and it's attached to an electronic device
someone is holding the motherboard in their hand and it's attached to an electronic device

Materials needed:

  • New CR2032 coin cell battery
  • A small-Philips (+) screwdriver
  • Small needle-nose pliers (optional)
  • Soft, non-abrasive cloth

Understanding the Cartridge

The GBA cartridge has four screws on the backside that need to be removed. Once these are out, the cartridge will open into two halves.

How to Replace a Pokémon Silver CR2025 Save Battery | The Old School Gam...
How to Replace a Pokémon Silver CR2025 Save Battery | The Old School Gam...
Gameboy Rumble Cartridge Battery Cover
Gameboy Rumble Cartridge Battery Cover

The battery itself is located on the circuit board, but it might be covered by a label or a heat sink. Be careful not to damage any components while removing them. The battery fits into a small compartment, snapped into place by two small metal clips.

Removing the Old Battery

To remove the battery, gently lift one of the clips with your screwdriver or a small, flat tool. Once the clip is lifted, the battery should pop right out. Be gentle to avoid bending the clip or damaging the battery. Sometimes, the battery might be glued in place. If that's the case, be extra careful not to break the battery while removing it.

AD

Place the old battery aside. It's a good idea to dispose of it responsibly, according to your local electronic waste disposal guidelines.

Installing the New Battery

Now, it's time to insert the new battery. Make sure the positive side (the side with the plus sign) faces upwards. This is important, as the battery needs to be correctly aligned to work properly.

Positioning the New Battery

Carefully position the new battery in the compartment where you removed the old one. Ensure the positive side of the battery faces upwards. The battery should fit snugly, with the edges of the compartment holding it securely in place.

AD

If the battery doesn't seem to fit, double-check that you've got the correct battery and it's installed in the correct orientation. You might also need to remove some foil or label residue from the compartment to make room for the new battery.

Securing the New Battery

Once the battery is in place, gently press one of the clips back to secure the battery. The clip should fit snugly and hold the battery firmly in place. If the clip is difficult to press, you might need to use a tool like a small needle-nose pliers to press it down.

It's normal to hear a slight "pop" or "click" when the clip is secured properly. If you don't hear this, double-check that the battery is fully inserted and the clip is properly secured.

AD

Finally, reassemble the cartridge by placing the two halves back together and replacing the four screws. After that, test your GBA to ensure it can save games and settings again. If everything works as expected, you've successfully replaced the battery in your GBA cartridge.

Remember, batteries have a limited lifespan and will need to be replaced again in the future. But with this guide, you're now equipped to handle this DIY gaming task. Happy gaming!

AD