how to replace pull cord on snowblower

Step-by-Step Guide: Replacing Pull Cord on Snowblower

By Melissa King
AD

Tired of struggling with a reluctant snowblower this winter? A worn-out pull cord could be the culprit. Replacing it is a straightforward task that can save you the hassle of calling in a professional or purchasing a new machine. Let's dive into a step-by-step guide on how to replace a pull cord on your snowblower, ensuring your winter cleanup is efficient and stress-free.

Before we begin, ensure you have all the necessary tools and replacement parts ready. Safety is paramount, so make sure to disconnect the spark plug wire before starting to avoid any accidental start-ups. Now, let's get started with the replacement process.

Gathering Tools and Understanding the Cord

Before you begin, it's crucial to gather the right tools and understand the pull cord mechanism. You'll need a new pull cord, a screwdriver (depending on your snowblower model), pliers, and a pair of gloves to protect your hands from rough edges.

AD
How to Repair a Pull Cord on a Snowblower
How to Repair a Pull Cord on a Snowblower
how to replace the snow blower pull cord on your car's engine?
how to replace the snow blower pull cord on your car's engine?
Snowblower Pull Cord Repair - video
Snowblower Pull Cord Repair - video

The pull cord on your snowblower is attached to a recoil starter mechanism. When you pull the cord, it winds up the starter rope, which then unwinds and spins the flywheel to start the engine. It's a simple yet vital component, and replacing a worn-out cord ensures optimal performance and safety.

Inspecting the Current Cord and Prepping for Replacement

First, check the condition of your existing pull cord. If it's frayed, broken, or difficult to pull, it's time for a replacement. The cord is typically attached to a pulley system. You'll find the starting point at the bottom of the handle, where the cord feeds through a hole and loops around the pulley.

How to Replace a Snowblower Pull Cord – Easy DIY Rope Fix
How to Replace a Snowblower Pull Cord – Easy DIY Rope Fix
Snowblower Pull Cord Repair - video
Snowblower Pull Cord Repair - video

Before removing the old cord, tie a knot close to the handle to prevent it from being pulled completely through the system. This knot will help you manage the cord while you're working. Now, let's proceed to remove the old cord.

Removing the Old Cord

Using pliers, gently pull the old cord to remove it from the starter mechanism. Be careful not to damage any internal components. As you pull, you should feel the cord unraveling from around the pulley and through the handle.

AD

Once removed, examine the end of the cord connected to the pulley. You might need to trim a small section if it's frayed or damaged. Similarly, check the end of the cord at the handle and trim it if necessary. Now that the old cord is out of the way, it's time to install the new one.

Installing the New Pull Cord

Before installing the new cord, make sure it's the correct type and length for your snowblower. Consult your machine's user manual or contact the manufacturer if you're unsure. Once you have the right cord, follow these steps to install it:

The new cord will come with a loop at one end. This loop will go around the pulley. Thread the cord through the hole at the bottom of the handle, and then feed the looped end up through the handle and into the starter mechanism.

AD

Securing the Cord to the Pulley

With the loop facing you, insert the end of the cord into the loop and pull it tight to secure the cord around the pulley. Make sure the cord is evenly wound around the pulley and not twisted. This step ensures a smooth and efficient pull when starting your snowblower.

Once secure, gently tug on the cord to ensure it's properly attached to the pulley. If it feels loose, readjust the loop and try again. Now, let's secure the other end of the cord at the handle.

Securing the Cord at the Handle

The other end of the cord will have a small hook or knot. This hook will go around the notch at the bottom of the handle. Thread the cord through the hole at the bottom of the handle, and then pull the cord up through the handle until the hook catches in the notch.

AD

With the cord now secured at both ends, give it a gentle tug to test its tension. It should feel taut, but not overly tight, to ensure a smooth pull when starting the engine. If the cord feels too loose or too tight, make adjustments as needed.

Reattach the spark plug wire and you're ready to test your newly installed pull cord. Pull the cord firmly but smoothly, and your snowblower should start up without any issues.

Regularly maintaining your snowblower's pull cord ensures optimal performance and longevity. Always store your machine properly, keeping the cord protected from damage and extreme temperatures. And remember, never force the cord if it's hard to pull, as this could indicate a problem with the engine or carburetor.

Now, with your newly installed pull cord, you're ready to tackle those winter snowstorms with confidence. Happy snowblowing!

AD