how to change the pull cord on a snowblower

Snowblower Cord Replacement: Step-by-Step Guide

By Jessica King
AD

Snowblowers make winter chores a breeze, but like any machine, they require regular maintenance to ensure peak performance. One common issue that snowblower owners may face is a worn-out or broken pull cord. When this happens, don't fret - replacing the pull cord is a simple process that you can handle at home. Let's guide you through the steps to change the pull cord on your snowblower, so you're ready for the next snowstorm.

Before you begin, ensure you have the necessary tools and a new pull cord that matches your snowblower's specifications. Safety is paramount when working on your snowblower, so make sure it's cool, unplugged, and/or disengaged from any power source.

Assessing Your Snowblower's Cord

Before diving into the replacement process, it's essential to understand why your pull cord needs changing. Most snowblower pull cords are made of nylon, a durable material that usually lasts for many years. However, they can wear out due to regular use, weathering, or tensions from improper starting techniques. If your pull cord is frayed, broken, or continuously tangles, it's time for a replacement.

AD
How to Repair a Pull Cord on a Snowblower
How to Repair a Pull Cord on a Snowblower
how to replace the snow blower pull cord on your car's engine?
how to replace the snow blower pull cord on your car's engine?
A slick and quick way to fix a broken pull start cord on an MTD snow blower
A slick and quick way to fix a broken pull start cord on an MTD snow blower

Inspect your snowblower's pull cord to identify the specific type you need. Single and double-cord systems are common, and both types can be found in various materials and colors. Make sure to purchase the correct cord for your snowblower to ensure a smooth replacement and safe operation.

Things You'll Need

To replace your snowblower's pull cord, you'll need a few basic tools and materials. Gather the following items before starting the process:

How To Replace Pull Cord On Lawn Mower?
How To Replace Pull Cord On Lawn Mower?
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
  • A new pull cord that matches your snowblower's specifications
  • Needle-nose pliers or wire cutters
  • A flathead or Phillips screwdriver (depending on the cord end type)
  • optionally: safety glasses and work gloves

Steps to Replace the Pull Cord

Now that you've gathered all the necessary tools and the correct pull cord, follow these detailed steps to replace the pull cord on your snowblower:

  1. Disengage the old cord: Start by examining the cord's attachment point on the snowblower. Most snowblowers have a small hole or indentation where the cord is anchored. Locate the end of the old cord and use needle-nose pliers or wire cutters to clip it off close to the anchor point. Be cautious not to damage the anchor or the surrounding area.
  2. Remove the old cord: With the end disengaged, slowly pull the old cord out through the snowblower's housing. Be patient and avoid forcing the cord, as it may snag or cause damage. If resistance occurs, use the pliers to guide the cord and gently snake it out.
  3. Thread the new cord: Now that the old cord is removed, it's time to thread the new one. Locate the entry point on your snowblower - this is usually on the top or side of the machine. Begin threading the new cord through the opening, using needle-nose pliers if required to guide the cord.
  4. Pull the cord through: Continue pulling the cord through the snowblower's housing until the entire length is free, with both ends accessible. Ensure that the cord is long enough to allow the engine to reach full throttle when pulled and is not too long that it drags on the ground or causes tangling.
  5. Assemble the loop: Locate the end of the new cord and create a small loop. The size of the loop depends on the threads' pitch - usually, a small loop (around 1/4 inch or 6 mm) is adequate. Pull the loop taut to avoid tangling during use.
  6. Attach the loop to the handle: Position the loop over the hook or pulley on your snowblower's handle. Ensure that the loop is secure and can easily slide back and forth with a smooth motion.
  7. Re-attach the cord to the engine bracket: Locate the engine bracket, where the cord's end will be anchored. Most snowblowers use a clip or a small hole with a screw. For clip-style brackets, simply depress the clip and insert the cord's end. For screw-type brackets, remove the screw using the appropriate screwdriver, insert the cord's end, and re-attach the screw.
  8. Test the new pull cord: Gently pull the new cord to ensure it's properly attached and functions correctly. The loop should slide smoothly along the handle, and the engine should start with a firm, steady pull.

Maintaining Your Snowblower's Pull Cord

Proper maintenance can extend the life of your snowblower's pull cord. Here are some tips to keep your cord in good condition:

AD

Proper starting technique: Always pull the cord firmly and steadily, letting the engine catch before pulling again. Avoid yanking the cord or pulling it too quickly, as this can cause unnecessary wear and tear.

Store your snowblower properly: When not in use, store your snowblower in a cool, dry place, away from moisture and excessive heat. This will help preserve the cord and other components.

Regularly inspect the cord: Make it a habit to check your snowblower's pull cord before each use. Catching signs of wear early can help prevent a sudden breakdown and ensure safe operation.

AD

By following these guidelines, you'll have your snowblower's pull cord replaced in no time, and your machine will be ready for the next winter storm. Regular maintenance and proper care will ensure many seasons of trouble-free operation. Happy snowblowing!

AD