how to replace husqvarna trimmer line

Easy Husqvarna Trimmer Line Replacement: Step-by-Step Guide

By Christopher Anderson
AD

The Husqvarna trimmer line is a vital component of your string trimmer, ensuring a clean and even cut through grass and weeds. Over time, it's inevitable that you'll need to replace it. Don't worry, it's a simple process that you can do yourself with just a few tools. This guide will walk you through the steps, from gathering your materials to successfully replacing your Husqvarna trimmer line.

Before we begin, it's important to ensure your safety. Always remove the spark plug lead from the trimmer when performing maintenance tasks to prevent accidental starting. Also, ensure the trimmer is on a flat surface and, if necessary, secure it by putting it on a vice.

Gathering Your Materials

First, you'll need to gather the right tools and materials for the job:

AD
How to Replace Trimmer Line in a Husqvarna String Trimmer
How to Replace Trimmer Line in a Husqvarna String Trimmer
How To Refill Your Trimmer Line
How To Refill Your Trimmer Line
How to Change a Husqvarna Line Trimmer Head- T25, T35
How to Change a Husqvarna Line Trimmer Head- T25, T35
  • New Husqvarna trimmer line - Ensure it's compatible with your model. The packaging will usually specify the line's diameter and the trimmer's model number.
  • Needle-nose pliers - These will help you grasp and bend the line.
  • A flathead screwdriver - This will be used to release the trimmer head cover.
  • Your Husqvarna trimmer - Of course!

Preparation: Inspecting Your Trimmer

Start by inspecting your trimmer. Look for any signs of wear and tear, and ensure that the trimmer head is in good working order. If there are any issues, you may need to replace the head as well as the line.

Next, unscrew the spool from the trimmer by turning it counterclockwise. This may be done by hand or, if it's particularly tight, using a wrench. Once the spool is off, you'll see the old line.

How to replace string trimmer line
How to replace string trimmer line
Husqvarna trimmer has starting problems
Husqvarna trimmer has starting problems

Removing the Old Line

With the old line exposed, you can now remove it. Start by cutting the line with a pair of scissors or wire cutters. Once cut, you can use needle-nose pliers to grasp the end of the line and pull it out from the spool.

Be careful not to damage the spool when pulling the line. If the line is broken or tangled, you may need to cut it in smaller sections. Once all the old line is removed, clean the spool to ensure there are no leftover bits of line.

AD

Preparing the New Line

Now that the old line is removed, it's time to prepare your new Husqvarna trimmer line. First, unroll about 10 feet of line from the new spool. This will give you enough line to wind onto your trimmer's spool and replace the old line.

Next, cut the line to the required length. The packaging of the new line should specify the length you'll need. Usually, this is between 16 to 22 feet. When cutting the line, make sure to match the cut with the feeder hole on your spool. This ensures the line feeds smoothly when in use.

Winding the Line onto the Spool

The most common method for winding the line onto the spool is known as the wind-on method. Start by inserting the end of the line into the hole on the side of the spool. Once inserted, hold the end of the line with one hand to keep it in place.

AD

With your other hand, start winding the line onto the spool. Make sure to wind the line in the direction indicated by the arrow on the spool. This is usually in a clockwise direction. Wind the line tightly against the spool, ensuring there are no loose or overlapping strands.

Loading the Line onto the Trimmer

Once the line is fully wound onto the spool, it's time to load it onto your trimmer. Start by lining up the holes on the spool with the holes on the trimmer head. This may take a little maneuvering, but once done, secure the spool by turning it clockwise.

Next, reattach the spark plug lead. Now, your Husqvarna trimmer is ready for use with its new line. Always remember to turn the trimmer head clockwise when using it to ensure the line feeds out smoothly.

AD

Regularly replacing your Husqvarna trimmer line will ensure your tool continues to function optimally. If you notice any issues with the line feeding out or breaking frequently, it may be time to replace the spool as well. Happy trimming!

AD