homelite trimmer how to replace string

Homelite Trimmer String Replacement: Step-by-Step Guide

By Christopher Young
AD

Keeping your Homelite trimmer in top shape is essential for tackling overgrown hedges and unruly weeds. One key maintenance task is replacing the trimmer line, also known as string. This guide will walk you through the process, ensuring your Homelite trimmer maintains its edge and efficiency.

Before we dive in, let's address a common question: when should I replace the trimmer line? Inspect your line regularly for signs of wear or damage. If it's become dull, frayed, or shortened, it's time for a replacement. Most Homelite trimmers use .065" or .080" line, so ensure you have the correct size before starting.

Preparing Your Homelite Trimmer

Before you begin, ensure your Homelite trimmer is turned off and unplugged. Remove the line from the trimmer head to make the process smoother.

AD
How to replace string on Homelite grass trimmer
How to replace string on Homelite grass trimmer
How to Replace String Trimmer Line
How to Replace String Trimmer Line
How to replace a trimmer pull cord/string.
How to replace a trimmer pull cord/string.

Now, let's identify the parts of your trimmer head. Here's a simple rundown:

  • Line exit. This is where the line feeds out of the trimmer head.
  • Line feed. This is where the new line will be inserted.

Removing the Old Line

First, retract the old line. Homelite trimmers often have a line retraction button. Press and hold this while pulling out the old line to avoid losing it in your workspace.

String Trimmer Head | How to install new trimmer line on a traditional bump head
String Trimmer Head | How to install new trimmer line on a traditional bump head
How to replace string trimmer line
How to replace string trimmer line

Next, remove the old line from the trimmer head. If there's any remaining line in the spool, you can cut it off for easier removal. Once the old line is completely out, discard it.

Inserting the New Line

Cut your new line into two equal lengths. This will make the process faster and ensure both ends are used evenly. Insert one end of the line into the line feed. The shape of the feed will keep the line in place.

AD

Don't try to pull too much line through at once. Gently pull about 10-12 inches of line through the head, leaving a slight curve at the bottom. This 'J' shape prevents the line from coming out before you're ready.

Re-stringing and Testing

Now, it's time to re-string your Homelite trimmer. Thread the line through the line exit, holding the end to keep it in place. Some trimmers require you to hold a button to release the spool, while others will allow the line to feed automatically as you wind.

Wind the line around the spool, ensuring it's evenly distributed. Leave about 6-10 inches of line extending from the trimmer head. Trim this excess line to your desired length. Most users leave about an inch or two of line beyond the bottom of the trimmer head.

AD

Securing the Line

Once the line is at the correct length, secure it in place. Some Homelite trimmers have a small notch or claw that holds the line. Others may require you to knot the line before trimming the excess. Always consult your user manual for specific instructions.

Finally, test your Homelite trimmer by switching it on. It should feed the new line automatically. If not, try gently tugging the line to stimulate the line feed. Once you've confirmed the line is feeding correctly, you're all set!

And that's a wrap! Regularly replacing the trimmer line in your Homelite trimmer ensures smooth operation and maximizes lifespan. If you have any issues or further questions, always consult your Homelite user manual or contact their customer support for personalized assistance. Now, go forth and tame those unruly weeds!

AD
AD