how to replace nintendo switch joystick

Fix Nintendo Switch Joy-Con: Easy Step-by-Step Replacement Guide

By Amanda Thompson
AD

Has your Nintendo Switch's joy-con started acting up? Don't let wonky joysticks or stick drift issues put a damper on your gaming experience. You can easily replace the joystick on your Nintendo Switch. In this comprehensive guide, we'll walk you through a simple, step-by-step process to help you fix your joy-con and get back to gaming in no time.

Before you start, remember to gather all the necessary tools. You'll need a Phillips #00 screwdriver, a/Game Bit Driver Set for extreme precision, tweezers, and a prying tool. Also, ensure you have a new joystick module and a micro USB cable to reconnect your joy-con to your console during the process.

Removing the Joy-Con Shell

To access the internal components of your joy-con, you'll first need to remove the shell. Start by pointing the ZR button towards you and using your prying tool to carefully lift the retry. The retry is held in place by plastic snaps, so you might need to wiggle the prying tool gently to release it.

AD
a person wearing black gloves holding a yellow nintendo wii game controller
a person wearing black gloves holding a yellow nintendo wii game controller
a hand holding a blue nintendo wii game controller next to stickers that say stick drift
a hand holding a blue nintendo wii game controller next to stickers that say stick drift
Stick drift sucks, so here’s how to replace the Joy-Con thumbsticks on your Switch
Stick drift sucks, so here’s how to replace the Joy-Con thumbsticks on your Switch

Once you've removed the retry, use your screwdriver to remove the four 4.5mm Phillips screws securing the thumbsticks. Keep these screws safe as you'll need them later to reinstall the thumbsticks. Now, use your prying tool to lift the shell, starting from the top. Be gentle to avoid flexing or cracking the shell.

Disconnecting the Old Joystick Module

With the shell off, you'll see the joystick module secured by two clips at the top. Use your tweezers to carefully squeeze the clips towards the center to release the joystick module. Gently pull it out, and disconnect the ribbon cable from the motherboard.

How To Fix A Nintendo Switch Joy-Con Controller Stick
How To Fix A Nintendo Switch Joy-Con Controller Stick
Learn How to Fix Joystick Drift
Learn How to Fix Joystick Drift

Be sure not to tug on the ribbon cable, as this can cause damage. Instead, grasp the connector and pull it straight out to disconnect it from the motherboard. Now, you're ready to replace the old joystick module with the new one.

Installing the New Joystick Module

Inspect your new joystick module to ensure the ribbon cable is fully seated. If it's not, use the tweezers to carefully push it into place. Align the two clips at the top of the module with their respective slots on the joy-con's motherboard, then gently press the module into place.

AD

If the module doesn't seat easily, double-check that the ribbon cable is fully connected, and the module is properly aligned. Once the module is secure, reconnect the joy-con to your Nintendo Switch using the micro USB cable. Turn on your Switch, and follow the on-screen prompts to recalibrate the new joystick.

Reassembling the Joy-Con

Now that you've successfully replaced the joystick module, it's time to put your joy-con back together. Start by reinstalling the thumbsticks, making sure they're properly seated. Once the thumbsticks are secure, use your screwdriver to reattach the four screws you removed earlier.

Carefully snap the shell back into place, making sure the plastic snaps fully engage. Once the shell is secured, your joy-con is ready to use. Test the new joystick to ensure it's working correctly, and enjoy your improved gaming experience.

AD

By following this guide, you've given your Nintendo Switch joy-con a new lease on life, saving you the time and expense of buying a replacement. Happy gaming!

AD