How to Replace Broan Bathroom Fan Motor
If your Broan bathroom fan has stopped working, it's likely that the motor has failed. Replacing the motor is a relatively straightforward DIY task that can save you the cost of calling a professional. In this guide, we'll walk you through the process of how to replace a Broan bathroom fan motor step by step.
Before you begin, ensure you have the necessary tools and replacement motor at hand. You'll typically need a screwdriver, pliers, wire stripper, and a new motor that's compatible with your fan. Broan provides a model number on each fan, so use this to find an exact match.
Identifying the Fan Type
The first step is to identify the type of fan you have. Broan fans come in two primary types: whole-house fans and local exhaust fans. Both types are used to control indoor air quality, but their mechanisms differ, so it's crucial to know which one you have.
Whole-house fans operate by drawing in cool air from outside and pushing it through your home. Local exhaust fans, like the ones in your bathroom, work by removing moisture and odors from your bathroom and expelling them outside.
Locating the Access Panel
Once you've identified your fan type, you can begin the process of replacing the motor. Start by locating the access panel on your fan. This is usually a removable grill or cover on the ceiling or wall, depending on your fan's installation type.
Some fans may have a safety limiter that activates when the fan is running continuously. If your fan has this feature, ensure it's disabled before proceeding. This can typically be done by turning the fan light on and off.
Removing the Fan Housing
With the access panel removed, you'll see the fan housing. This is the main body of the fan that contains the motor. To remove it, you'll need to unfasten the mounting screws using your screwdriver.
Once the screws are loose, gently pull the housing away from the ceiling or wall. Be careful not to damage any of the wiring. If the housing is stuck, you may need to use a flathead screwdriver or a pry bar to gently coax it out.
Replacing the Motor
With the fan housing removed, you'll have access to the old motor. It's now time to uninstall the old motor and install the new one. Broan motors are typically held in place by a series of screws and attached wires.
Before proceeding, take a moment to familiarize yourself with the wiring scheme. This will help you reassemble the fan correctly. It's also a good idea to take photos of the wiring as you remove it to serve as a visual guide during reassembly.
Removing the Old Motor
Start by disconnecting the power to your fan at the circuit panel. Safety first! Next, use your screwdriver to remove the screws holding the motor in place. It's also likely that the motor is attached to the fan blades with a central bolt. Unscrew this bolt carefully.
Now, you can disconnect the wires. The wiring is color-coded, with black representing the hot wire, white representing the neutral, and green or bare representing the ground. Slowly pull the old motor out, ensuring the wires don't snap off.
Installing the New Motor
Before installing the new motor, compare it to the old one to ensure they are indeed a direct replacement. You may need to rewire the old fan if the new motor has a different connector or configuration.
Once satisfied that the new motor is a direct replacement, align it with the fan blades and secure it with the central bolt. Ensure the bolts are tight but not over-tightened, as this can damage the motor.
Re-connecting the Wiring
Now, re-connect the wiring to the new motor, ensuring the colors match up correctly. For safety, you may want to use wire nuts to secure the connections. Be sure to cap off any exposed wires to prevent accidental shorts.
Once the wiring is securely connected, reattach the fan housing, ensuring the electrical box is properly secured. Finally, replace the access panel, making sure it's flush with the ceiling or wall.
That's it! You've successfully replaced your Broan bathroom fan motor. Don't forget to test the fan to ensure it's working correctly. Now, you can enjoy your fresh, moisture-free bathroom with the peace of mind that comes from a well-functioning exhaust fan. Happy DIYing!