how to replace evaporator fan motor kenmore bottom freezer

How to Replace Evaporator Fan Motor in Kenmore Bottom Freezer

By Joseph Thompson
AD

When your Kenmore bottom freezer refrigerator starts acting up, it can be a cause of concern, especially if the evaporator fan motor is the culprit. Replacing the evaporator fan motor can seem like a daunting task, but with the right steps and some patience, it's a job that many homeowners can handle. Let's guide you through the process, helping you understand the importance of the evaporator fan motor and providing a step-by-step walkthrough.

First, let's understand the role of the evaporator fan motor. This crucial component is responsible for circulating air over the evaporator coils in your refrigerator. These coils are part of the refrigeration system that takes warm air from inside the refrigerator and cools it down. If the evaporator fan motor isn't working properly, warm air can't circulate, leading to problems like excess frost, foul odors, and inadequate cooling. Now, let's dive into the process of replacing the evaporator fan motor in your Kenmore bottom freezer refrigerator.

Gathering Tools and Precautions

Before you start, ensure you have the necessary tools and take the required safety precautions.

AD
How to replace an evaporator fan motor in a side-by-side refrigerator
How to replace an evaporator fan motor in a side-by-side refrigerator
How to replace the evaporator fan motor in a top-freezer refrigerator | Repair guide
How to replace the evaporator fan motor in a top-freezer refrigerator | Repair guide
How to Replace a GE Refrigerator Evaporator Fan Motor
How to Replace a GE Refrigerator Evaporator Fan Motor

**Tools Needed:**

  • New Evaporator Fan Motor (compatible with your Kenmore model)
  • Screwdriver (Philips or flathead, depending on your model)
  • Pliers
  • Wire stripper
  • Work gloves
  • Flashlight

Safety Precautions

Before beginning, unplug your refrigerator from the power source to prevent any electrical shocks. Also, turn off the water supply to the ice maker (if present) to avoid any water damage. Finally, wear work gloves to protect your hands from sharp edges or moving parts.

How to replace the condenser fan motor in a top-freezer refrigerator | Repair guide
How to replace the condenser fan motor in a top-freezer refrigerator | Repair guide
Fix Your Kenmore Fridge, Cheap!!
Fix Your Kenmore Fridge, Cheap!!

It's a good idea to consult your Kenmore bottom freezer refrigerator's user manual for model-specific details. ChopTop Appliance's website provides downloadable manuals for most Kenmore appliances.

Accessing the Evaporator Fan Motor

With the necessary tools and safety precautions in place, you're ready to start the replacement process. The first step is to gain access to the evaporator fan motor.

AD

Before proceeding, ensure your refrigerator is defrosted. If not, allow the refrigerator to defrost completely. After defrosting, unplug the refrigerator and allow it to sit for at least 2-3 hours to avoid electrical shocks and ensure your safety.

Removing the Back Panel

Using a screwdriver, remove the screws securing the back panel of your refrigerator. The back panel is located at the bottom of the refrigerator, usually covered by a kick plate or toe grille. Once the screws are removed, carefully pull the panel off, using a gentle prying motion if necessary.

Tip: Label the screws as you remove them to ensure you put them back in the correct holes.

AD

Locating the Evaporator Fan Motor

With the back panel removed, use a flashlight to locate the evaporator fan motor. It's typically found near the bottom of the refrigerator, surrounded by wiring and other components. The fan motor is responsible for moving the fan blades, which force air over the evaporator coils.

Once you've located the motor, trace the wiring connected to it. Identify the power cord (usually a black wire) and the motor's control wire. These will need to be disconnected before removing the old motor.

Removing the Old Evaporator Fan Motor

With the back panel removed and the motor exposed, it's time to remove the old evaporator fan motor.

AD

Disconnecting the Wiring

Using wire stripper pliers, carefully strip about an inch of the insulation off the power cord and control wire connected to the motor. This will expose the wires, allowing you to disconnect them from the motor.

Safety Tip: Wear work gloves when handling wires to protect your hands from sharp wire ends.

Disconnecting and Removing the Motor

Carefully disconnect the power cord and control wire from the motor terminals. The power cord usually connects to the black terminal, while the control wire connects to the white or green terminal. Once disconnected, unplug the motor from the electrical outlet in the rear of the refrigerator.

Gently pull the old motor out of its mounting bracket, ensuring not to damage any surrounding components. If the motor is difficult to remove, you may need to gently wiggle it or use pliers to carefully twist the mounting bracket.

Installing the New Evaporator Fan Motor

Now that the old motor is out, it's time to install the new evaporator fan motor.

Connecting the New Motor

Position the new motor in the mounting bracket, making sure the motor shaft aligns with the opening in the bracket. Once properly positioned, secure the motor with the mounting screws.

Reconnect the power cord to the black terminal on the new motor, and the control wire to the white or green terminal. Ensure the wiring is securely connected and the insulation is properly restored to prevent electrical shorts.

Testing the New Motor

Before replacing the back panel, test the new motor to ensure it's working properly. Plug the refrigerator back into the power source and flip the light switch to the 'On' position. The new motor should start running immediately.

If the motor doesn't run, double-check your wiring connections and ensure the motor is properly secured in the mounting bracket. If the motor still doesn't run, you may need to contact a professional appliance repair technician.

Reassembling the Refrigerator

With the new motor confirmed to be working, it's time to reattach the back panel and restore your refrigerator to its original condition.

Reattaching the Back Panel

Carefully align the back panel with the bottom of the refrigerator and push it into place. Ensure all the edges are properly seated and aligned. Once the panel is securely in place, replace the screws and tighten them using a screwdriver.

Finally, reattach the toe grille or kick plate to cover the back panel screws and restore the refrigerator's appearance.

Restore power to your refrigerator and allow it to run for at least 24 hours to ensure the new evaporator fan motor is working properly and your refrigerator is cooling effectively. If you notice any issues, don't hesitate to consult with a professional or refer to your Kenmore refrigerator's user manual.

Congratulations! You've successfully replaced your Kenmore bottom freezer refrigerator's evaporator fan motor. By following these steps and taking your time, you've handled a potential problem before it becomes a major one. Regular maintenance and being proactive about potential issues can extend the life of your refrigerator and ensure it continues to run efficiently. If you're uncertain about any part of the process, don't hesitate to consult a professional or contact Kenmore's customer support for assistance.

AD