how to replace a pentair pool pump motor

Step-by-Step Guide: Replace Pentair Pool Pump Motor

By Andrew Garcia
AD

Ah, the dreaded hum of your Pentair pool pump motor that's just a little too loud, a little too persistent. It's a common issue with pool pumps, and while it might seem daunting, replacing the motor is a task you can handle. Here's a comprehensive guide on how to replace a Pentair pool pump motor, ensuring your pool stays crystal clear and the sound of your pump doesn't drown out your summer playlist.

The first step is accepting that you need a new motor. If the noise is relentless, or the motor's stopped working altogether, it's time to take the plunge. Safety first, though. Make sure the pump is disconnected from its power source before you start tinkering. Now, let's dive into the process.

Gather Your Tools and Replacement Motor

Before you start, ensure you have all the necessary tools. A replacement motor, adjustable wrench, socket wrench, Philips head screwdriver, and a bit of lubricant to make the process smoother. It's also a good idea to have a Pentair pool pump repair kit on hand, just in case. You'll want to buy a motor that's compatible with your pool pump model, so double-check that before you start.

AD
How to Replace a Pool Pump Motor -The Ultimate Video Guide
How to Replace a Pool Pump Motor -The Ultimate Video Guide
How to Replace Your Pool Pump Motor
How to Replace Your Pool Pump Motor
Pool Pump Replacement Guide: Know the Warning Signs
Pool Pump Replacement Guide: Know the Warning Signs

Take a moment to prepare your workspace. Lay out a towel to protect the motor and tools from the elements, and clear an area so you can work comfortably.

Understanding Motor Types

Pentair offers two types of motors: single-speed and two-speed. Make sure to replace like with like. The model number of your current motor can be found on the nameplate. If you're unsure, consult the Pentair manual or contact their customer support.

the words how to rest times on a penair pool pump are in white letters
the words how to rest times on a penair pool pump are in white letters
How To Replace a Pool Pump With An Energy Efficient Pool Pump
How To Replace a Pool Pump With An Energy Efficient Pool Pump

Single-speed motors are simpler but less energy-efficient. Two-speed motors, on the other hand, allow you to adjust the speed based on your pool's needs, potentially saving you money on energy bills.

Draining and Disconnecting the Old Motor

First, drain the pump of any water using the drain plug at the bottom. Then, disconnect the electrical wires from the motor. This might require some gentle persuasion with your Philips head screwdriver and adjustable wrench.

AD

Before you remove the old motor, take a photo of the wiring configuration. This will serve as a reference when you're connecting the new motor. Now, using your socket wrench, loosen the motor shaft coupling and slide it off. Debris and dirt can make this tough, so a bit of lubricant might help.

Installing the New Motor

First, prepare the new motor by running a new sediment nazis, which may require you to prime the O-rings. This ensures a tight, waterproof seal when the new motor is installed.

Slide the centrifugal force pole onto the motor shaft, then reattach the coupling. Tighten it with the socket wrench, but be careful not to overtighten. You don't want to damage the motor or the shaft.

AD

Reassembling the Pump

Now comes the fun part: putting everything back together. Using your reference photo, connect the electrical wires to the new motor. Ensure they're tight and secure. This is where the lubricant comes in handy again, making the connectors slippery and easier to seat.

Reassemble the pump housing parts, ensuring you replace any O-rings that were removed. Reattach the drain plug, reconnect the pump to your filter system, and prime the pump as per the Pentair manual instructions.

Testing the New Motor

Finally, it's time to test your work. Switch on the pump and listen carefully. If the noise is gone and the pump is functioning smoothly, you've done it! If not, don't worry; Pentair's customer support is always there to help.

AD

Pool maintenance is an ongoing process, but replacing a motor is a task you can be proud to accomplish yourself. It's a great feeling to keep your pool in shape and save a bit of money by doing it yourself. Enjoy your pool, and keep that maintenance schedule regular to prevent needing to replace another motor anytime soon.

AD