how to replace badger 1 garbage disposal

How to Replace Badger 1 Garbage Disposal: A Step-by-Step Guide

By John Lee
AD

Discovering that your trusty Badger 5 garbage disposal has stopped working or is noisy can be frustrating. But don't let the issue linger - replacing it is a more straightforward task than you might think. Let's walk you through the process step-by-step, ensuring you have a smooth and safe experience.

Before we dive in, it's important to note that replacing a garbage disposal is a do-it-yourself project, but it requires careful handling of electrical components. Always remember to switch off the power to your disposal unit at the circuit breaker and test the wires for any electricity before you start.

Gathering Your Tools and Materials

Before you embark on this task, ensure you have the following tools and materials:

AD
How to Replace a Garbage Disposal (Easy DIY Steps)
How to Replace a Garbage Disposal (Easy DIY Steps)
Troubleshoot Your Garbage Disposal with This Step-by-Step Guide - Fixes for Common Issues Revealed!
Troubleshoot Your Garbage Disposal with This Step-by-Step Guide - Fixes for Common Issues Revealed!
How to Replace Garbage Disposal Splash Guard Gasket
How to Replace Garbage Disposal Splash Guard Gasket
  • New Badger 5 garbage disposal (ensure it's the same horsepower as your old one)
  • Adjustable wrench
  • Pliers
  • Screwdriver (Flathead and/or Phillips, depending on your disposal's screws)
  • Tape measure
  • Channel lock pliers
  • Electrical tape
  • Wire connectors

Dismantling the Old Garbage Disposal

Begin by disconnecting the power supply. Locate your home's fuse box and turn off the power to the garbage disposal. Once you're sure the power is off, remove the ring that connects the disposal to the drain assembly. Use your hands to pull the disposal unit out of the mounting assembly.

Now, use a screwdriver to remove the screws securing the disposal in place. You might need to use an adjustable wrench or channel lock pliers to loosen the mounting screws. Once the screws are out, you can pull the disposal out of the sink cabinet. With the disposal now free, you can proceed to disconnect the drain lines and electrical wires.

Insinkerator Badger 5 Troubleshooting
Insinkerator Badger 5 Troubleshooting
the inside of a kitchen cabinet with an easy diy install and instructions on how to use it
the inside of a kitchen cabinet with an easy diy install and instructions on how to use it

Installing the New Garbage Disposal

First, double-check that the new Badger 5 disposal has the same horsepower as your old one. Then, it's time to connect the electrical wires. Ensure the wires match - usually, there's a black (hot), white (neutral), and green (ground) wire. Use wire connectors to join the wires together and secure them with electrical tape.

Next, connect the drain lines. The new disposal comes with a drainvn assembly which includes a new sink baffle, mounting ring, hex deflector, and splashguard. Position the new disposal in place and secure it using the screws you removed earlier. Connect the drain lines - the dishwasher drain line to the disposer's dishwasher inlet and the sink's drain lines to the disposer's drain inlet.

AD

Mounting and Securing the Disposal

With the disposal now in place, it's time to mount it securely. Ensure the disposal is well-aligned with the sink drain and the mounting ring. Use the provided screws to secure the disposal to the mounting assembly. Tighten the screws using a screwdriver, paying close attention not to overtighten.

Testing the New Garbage Disposal

Before you turn the power back on, carefully inspect your installation to ensure everything is securely tightened and correctly connected. Once you're satisfied with your work, switch the power back on at the circuit breaker. Run some cold water into the sink, turn on the disposal, and let it run for a few seconds to test it.

If your disposal is working correctly, you should hear the motor running smoothly and feel the water being pulled down the drain. If you encounter any issues, ensure you've disconnected and reconnected all the wires and hose connections securely.

AD

Replacing a Badger 5 garbage disposal might seem daunting, but with the right tools and a careful, step-by-step approach, you'll have your kitchen back in working order in no time. If you're unsure about any aspect of the process, don't hesitate to consult a professional. Happy DIYing!

AD