how to replace a garbage disposal video

"Step-by-Step: Replacing Your Garbage Disposal [Video Guide]"

By Kevin Williams
AD

If your garbage disposal has broken down or is causing issues, it might be time for a replacement. This comprehensive guide will walk you through the process of how to replace a garbage disposal, ensuring a smooth and safe installation. With the right tools and a little elbow grease, you can tackle this project like a pro.

Before you dive in, let's ensure you have all the necessary tools and equipment: a new garbage disposal unit compatible with your plumbing, screwdriver, adjustable wrench, pliers, channel-lock pliers, plumber's putty, new lock washer and mount assembly (if needed), and old towels or rags for clean-up. Now, let's get started!

Preparation and Removal of the Old Unit

Before proceeding, ensure the power to your garbage disposal is off and the unit is unplugged from the electric socket to prevent any accidents.

AD
How To Install a Garbage Disposal
How To Install a Garbage Disposal
How to Reset a Garbage Disposal: Before Replacing the Machine
How to Reset a Garbage Disposal: Before Replacing the Machine
a man sitting in front of a cabinet holding a knife
a man sitting in front of a cabinet holding a knife

First, gather underneath the sink cabinet and collect any items within easy reach, making your workspace clutter-free. Detach the drain pipe and electrical wires connected to the old unit, taking note of their locations for proper reassembly.

Disconnecting the Drain

Position a bucket underneath the drain pipe to catch any possible debris. Use your adjustable wrench to loosen and remove the three boltes connecting the discharge pipe to the disposal unit. Remove the pipe and set it aside.

Garbage Disposal Installation: A Beginner’s Guide
Garbage Disposal Installation: A Beginner’s Guide
How to Remove A Garbage Disposal, Repair and Re-Install
How to Remove A Garbage Disposal, Repair and Re-Install

Next, unscrew the large clamp that secures the dishwasher hookup to the disposal. Disconnect the dishwasher discharge tube from the disposal Tales, leaving it attached to the sink drain. Disconnect the old unit's mounting ring and remove it.

Disconnecting the Electrical Wires

Under the sink, you'll find the electrical wires connected to the garbage disposal. Carefully loosen the wires with your channel-lock pliers, being cautious not to damage them. Once loosened, disconnect them from the disposal.

AD

Remove the faceplate of the disposal by unscrewing the mounting ring and pulling the unit out slightly. There should be three mounting screws – unscrew and remove them. Now, when you lift the disposal up, it should disengage from the mounting tabs. Those tabs may be difficult to remove – you might need to use a flathead screwdriver to pry them out.

Installing the New Garbage Disposal Unit

With the old unit removed, it's time to install the new garbage disposal. Ensure the new unit is an exact replacement or compatiable to avoid any compatibility issues.

Begin by installing the new mounting assembly, if required. Position the disposal's discharge pipe opening in the same direction as the drain-oriented (on the two o'clock position in a clockwise direction from the top). Using your hands, press the new disposal into place, ensuring it securely locks onto the mounting assembly.

AD

Securing the electrical connections

Assemble the supply wires from the wall socket and ground wire to the disposal. Look for the white and black wires, connect them to the black and red wires on the disposal, respectively. Wrap the connections with electrical tape to secure them.

Secure the ground wire to the green grounding screw by tightening the screw clockwise. Afterwards, reinstall the faceplate, ensuring the wires don't get trapped. Apply a small amount of plumber's putty along the bottom rim of the mounting ring. Reattach the mounting ring to the sink's opening, ensuring a tight seal.

Reconnecting the Drain Pipe and Further Connections

Reattach the dishwasher discharge tube and drain pipe to the new garbage disposal. Secure these connections with the clamps previously removed from the old unit. Reattach the power cord of the disposal to the electrical socket, ensuring it's properly connected.

AD

Turn the power back on at the circuit breaker or fuse box and test your newly installed garbage disposal by running water and turning on the disposal. If everything works smoothly, you've successfully replaced your garbage disposal like a pro!

Don't forget to clean up your workspace! Remember to properly dispose of the old garbage disposal unit according to your local waste management regulations.

AD