how to replace a thermistor

Easy Thermistor Replacement: How-To Guide

By Daniel Robinson
AD

Thermistors play a crucial role in regulating temperature in various devices such as sensors, thermostats, and heat exchangers. When your thermistor stops working or isn't functioning as expected, replacing it can restore your device's performance and efficiency. Here's a comprehensive guide on how to replace a thermistor, ensuring safety and accuracy.

Before you start, ensure you have the right replacement thermistor. The new thermistor should match the original's rated resistance, temperature coefficient, and physical dimensions to ensure optimal performance and a proper fit.

Preparation and Safety Precautions

Before embarking on this task, follow these vital safety precautions to protect yourself and your equipment:

AD
How to replace the thermistor in a top-freezer refrigerator | Repair guide
How to replace the thermistor in a top-freezer refrigerator | Repair guide
How to replace the defrost thermistor in a top-freezer refrigerator | Repair guide
How to replace the defrost thermistor in a top-freezer refrigerator | Repair guide
How to replace a dryer thermistor | Repair guide
How to replace a dryer thermistor | Repair guide
  • Disconnect power to the device where the thermistor is located.
  • Allow the device and thermistor to cool down to prevent any burns.
  • Wear safety glasses to protect your eyes from debris or small parts.
  • Use insulated tools to prevent electrical shocks.

Identifying the Thermistor

To identify the thermistor, consult your device's manual or search for a wiring diagram online. Thermistors are usually marked with letters such as RTD, PT, or NTC, followed by a unique number or code. Record these details as they'll help you find the correct replacement.

Gathering Tools and Materials

Collect the necessary tools and materials to ensure a smooth replacement process:

How to replace a freezer thermistor | Repair guide
How to replace a freezer thermistor | Repair guide
Bosch Dishwasher Thermistor Replacement, Repair #00165281
Bosch Dishwasher Thermistor Replacement, Repair #00165281
  • A multimeter to test the faulty thermistor and verify the new one.
  • Soldering iron and solder to remove and attach the new thermistor.
  • Small insulated pliers to handle wires and remove components.
  • Wire cutters and stripper to cut and prepare wires.
  • The new replacement thermistor.

Removing the Faulty Thermistor

Carefully remove the faulty thermistor by following these steps:

  1. Locate the thermistor's solder joints on the PCB. These are typically fed through holes or attached with surface-mount technology (SMT) pads.
  2. Use a soldering iron to heat the solder on one end of the thermistor. Once the solder is molten, gently pull the thermistor's leads out with small pliers.
  3. Repeat the process for the other end of the thermistor. If the thermistor is SMT, use desoldering braid or wick to remove the solder from the pads.

Testing the New Thermistor

Before installation, test the new thermistor to ensure it's functional and has the correct resistance. Set your multimeter to measure resistance (ohms) and touch the probes to the thermistor's terminals. The displayed resistance value should match the expected resistance, given the thermistor's rated temperature. Keep in mind that resistance values change with temperature.

AD

Installing the New Thermistor

Once you've confirmed the new thermistor is functional, carefully install it as follows:

  1. Solder the new thermistor onto the PCB, ensuring its orientation matches that of the original thermistor.
  2. If the thermistor is SMT, use a specialized SMT tool or tweezers to place it on the pads. Melt a small amount of solder on one pad, securing the thermistor. Then, solder the other ends and reflow if necessary.

Final Testing and Verification

Before concluding, perform a final test to ensure the new thermistor functions correctly and the device works as expected:

  1. Reconnect power to the device and turn it on.
  2. Monitor the device's performance and see if it responds appropriately to temperature changes. For most devices, this involves observing the reading on a display or the response of a related system component, such as a heater or cooling fan.

Replacing a thermistor might seem daunting, but with the right precautions and careful execution, you can restore your device's functionality and prevent further damage. Once you've successfully replaced the thermistor and confirmed that your device works properly, remember to monitor its performance periodically to ensure optimal efficiency. If you're ever unsure about the process, consult a professional or the device's manufacturer for guidance.

AD
AD