how to replace moen 1222

Moen 1222 Replacement Guide: Easy Steps to Fix Your Faucet

By Andrew White
AD

Is your Moen 1222 faucet acting up? Don't worry, it's a common issue that many homeowners face. In this comprehensive guide, we're going to walk you through the process of replacing your Moen 1222 faucet, step by step. By the end of this, you'll have a brand new faucet that works like new.

Before we dive in, it's important to note that this guide assumes you have basic plumbing knowledge. If you're a beginner, don't worry, we'll keep it as simple as possible. Let's get started!

Gather Your Tools and New Faucet

First things first, you'll need to gather all the necessary tools and the new faucet. The tools you'll need include a plumber's putty, adjustable wrench, channel locks, and a screwdriver. For the new faucet, make sure it's compatible with your sink. Moen 1222 faucets are single hole mount, so ensure your new faucet is as well.

AD
How to replace a Moen 1222 / 1222B shower faucet cartridge
How to replace a Moen 1222 / 1222B shower faucet cartridge
How to install Moen 1225 & 1225b Shower Cartridge. Similar to 1222
How to install Moen 1225 & 1225b Shower Cartridge. Similar to 1222
Moen shower won't shut off, how to replace moen 1222b replacement cartrige
Moen shower won't shut off, how to replace moen 1222b replacement cartrige

Cartridges are not interchangeable between different faucet models, so buy the exact replacement. If you're unsure, you can take the old cartridge to the hardware store to match it. It's also a good idea to have a few extra parts on hand just in case.

Preparation: Turn Off the Water Supply

Before you start, you'll need to turn off the water supply to your faucet. Locate the shutoff valves behind the access panel under your sink. If you can't find them, they might be located in the basement or crawlspace, or you may need to call a professional plumber.

How to Remove Moen Faucet Handle Without Screws in 10 Way
How to Remove Moen Faucet Handle Without Screws in 10 Way
Replacing A Moen 1222 Positemp Cartridge For Tub & Shower - Plumbing Repair - Ultra Plumbing
Replacing A Moen 1222 Positemp Cartridge For Tub & Shower - Plumbing Repair - Ultra Plumbing

Once you've found the valves, turn them clockwise until they stop. This will shut off the cold and hot water to your faucet. To double-check if the water is off, turn on the faucet to release any residual water pressure.

Removing the Old Moen 1222 Faucet

Now that the water is off, it's time to remove the old faucet. Use an adjustable wrench to loosen and remove the faucet base and mounting nuts. Then, remove the faucet from the sink. You might need to gently tap the faucet with a hammer to loosen it if it's stuck.

AD

Next, remove the old faucet cartridge. It's usually secured with a retaining clip or set screw. Remove the clip or unscrew the set screw, and then pull the cartridge straight out. If the cartridge is stuck, use needle-nose pliers to gently pull it out.

Installing the New Faucet Cartridge

Now that the old faucet and cartridge are out, it's time to install the new one. First, apply some plumber's putty around the base of the new cartridge. This will create a waterproof seal.

Next, insert the new cartridge into the faucet base, making sure it's properly aligned and fully seated. Then, install the faucet handle Assembly, securing it with the set screw or retaining clip.

AD

Installing the New Faucet Base

With the new cartridge installed, it's time to attach the new faucet base. Apply a small amount of plumber's putty around the base, then position it in the hole in your sink. Secure the base with the mounting nuts, using an adjustable wrench to tighten them.

Once the base is secure, turn the faucet handles to the 'on' position to check if there are any leaks. If everything is tight and there are no leaks, turn the water supply valves back on, opening them counterclockwise.

Testing Your New Faucet

After turning the water supply back on, let the water run for a minute to clear out any air in the lines. Then, test your new faucet to ensure it's working properly. It should be smooth, leakage-free, and have the exact same functionality as your old one.

AD

If at any point you feel uncertain or the process seems too complex, don't hesitate to contact a professional plumber. It's always better to be safe than sorry when it comes to your home's plumbing.

Congratulations, you've successfully replaced your Moen 1222 faucet! Now that you've upgraded your sink, you might want to consider updating your kitchen or bathroom accessories to match. Thanks for choosing this guide, and happy plumbing!

AD