how to replace 3ds screen

Easily Fix Your 3DS: DIY Nintendo 3DS Screen Replacement Guide

By Mark Taylor
AD

Have you found yourself facing a cracked or damaged screen on your Nintendo 3DS? You're not alone. Nintendo 3DS models are known for their robust build, but the screen is a common wear and tear point. Replacing the screen is a viable option, and with the right tools and guide, you can do it at home. Here's a step-by-step guide on how to replace your 3DS screen.

Before we dive into the process, note that opening your 3DS will void its warranty. Only proceed if you're comfortable with the risk. Also, ensure you have the following tools and parts ready: a Tri-wing screwdriver (size 00), a heat gun or iOpener, a spudger, a set of tweezers, replacement 3DS screen, and some patience.

Understanding Your 3DS Screen

The Nintendo 3DS screen is not a simple glass panel. It's a complex assembly of several components: a glass faceplate, a touchscreen digitizer, the LCD, and the flexible circuit board connecting them. You'll need to replace the entire assembly, not just the glass.

AD
Repairing a Nintendo DS Lite
Repairing a Nintendo DS Lite
new 3ds xl ips TNT screen replacement simple identification method
new 3ds xl ips TNT screen replacement simple identification method
IPS Screen For 2015 Nintendo New 3DS Xl Replacement
IPS Screen For 2015 Nintendo New 3DS Xl Replacement

Nintendo has used different screen types across the 3DS family. Ensure you're using a compatible replacement screen that matches your 3DS model (original, XL, 2DS, New 3DS, or New 3DS XL). Using an incompatible screen can lead to functional issues or even damage your 3DS.

Preparation: Back Up Your Data

Before you start, back up your 3DS data to avoid losing your saved games or personal information. Use the Sidney or check-point save management tools to back up your data via a computer.

How To Change / Replace / Fix / Repair An iPad LCD Screen
How To Change / Replace / Fix / Repair An iPad LCD Screen

Next, make sure your 3DS is powered off, and remove any SD cards or game cards. Also, have a bowl of rice or silica gel packets ready. You'll need them to prevent electrostatic discharge later.

Heating the 3DS: Why and How

Heating helps soften the adhesive securing the screen. This makes it easier to remove the screen without damaging the 3DS's internal components. Use a heat gun on low setting, or an iOpener for about 10-15 seconds.

AD

Gently place the 3DS face down on the rice or silica gel for about 30 minutes. This helps dissipate any static charge. Now, place the 3DS face up, and let's proceed to the next steps.

Removing the Screen Assembly

Start by removing the bottom screen. Use the Tri-wing screwdriver to unscrew the four screws at the bottom. Then, insert the spudger into the right side of the case, between the bottom screen and the inner casing. Gently pry off the bottom screen.

Now, let's remove the top screen. First, lift the top screen gently with the spudger. You'll see the screen assembly lifting with it. With the top screen partially lifted, carefully pull the digitsizer's ribbon cable towards you to release it from its socket. Then, gently lift the screen assembly off the 3DS body.

AD

Removing the Old Screen

With the screen assembly out, it's time to remove the old screen. First, remove the plastic cover on the back of the screen using the spudger or tweezers. Then, carefully peel off the old screen, starting from the corners. If necessary, use gentle heat to soften the adhesive.

Once the old screen is off, you'll see the LCD. Use the spudger to carefully separate it from the front case. Now, you're ready to install the new screen.

Installing the New Screen

First, ensure your new screen is compatible. Then, position it over the LCD. Use the spudger to align it properly. Carefully press the screen into place, making sure not to trap any air bubbles underneath.

AD

Once the new screen is in place, use the provided adhesive to secure it. Allow enough time for the adhesive to cure. Then, reattach the plastic cover using the spudger or tweezers.

Reassembling Your 3DS

Now that the new screen is in place, it's time to reassemble your 3DS. First, align the screen assembly and press it into the 3DS body. Then, reconnect the digitizer's ribbon cable.

With the top screen back in place, slide the bottom screen into position and secure it with the screws you removed earlier. Finally, reinsert the SD card or game card, and power on your 3DS.

Congratulations! You've successfully replaced your 3DS screen. If everything is working correctly, enjoy your gaming console like new. If you encounter any issues, don't hesitate to consult the Nintendo support or your screen's manufacturer. Happy gaming!

AD