How to Remove SimpliSafe Door Sensor
Are you a SimpliSafe user looking to remove or relocate your door sensor? Perhaps you're rearranging your home, or you've found the infrared sensor is triggering false alarms. Whatever your reason, this comprehensive guide will walk you through the process step by step. We'll ensure your door sensor is removed safely and efficiently, without voiding your system's warranty.
Before we dive into the process, ensure you have the following tools at hand: a flathead screwdriver, the unique activation key for your system (found on your base station), and your SimpliSafe mastery guide (if available). Let's begin.
Understanding Your SimpliSafe Door Sensor
First, let's understand the components of your SimpliSafe door sensor. It consists of two parts: the magnet, usually placed on the door frame, and the sensor itself, which is typically mounted on the door. When the door is closed, the magnet and sensor are close together, completing an electrical circuit. When the door is opened, the circuit is broken, triggering the alarm.
Now that we're familiar with the basics, let's get started on removing the sensor.
Preparation: Disarming Your System
Before you begin, you must disarm your SimpliSafe system. Here's how:
1. Enter your unique master passcode on the keychain remote or the keypad to disarm the system.
2. Press the 'Off' button on the base station. The 'Armed' light should turn off, indicating the system is disarmed.
Removing the Door Sensor
With your system disarmed, it's time to remove the sensor.
1. Carefully remove the cover of the sensor using a flathead screwdriver. The cover should pry off easily, revealing the sensor's interior.
2. Locate the sensor's wires. Gently squeeze the wire connectors and pull the wires out. The sensor should now be completely detached from the wire leads.
3. Remove the sensor from its mounting location, using the flathead screwdriver if needed. Be careful not to damage the door or the sensor during this process.
Relocating or Reinstalling Your SimpliSafe Door Sensor
If you plan to relocate your door sensor instead of removing it entirely, follow these steps:
1. Identify the new location for your door sensor. Prime the new spot with painter's tape to ensure it's level and free of debris.
2. Reinstall the sensor at the new location, ensuring it's securely mounted. The magnet and sensor should be close together when the door is closed, but not touching.
3. Test the sensor by opening and closing the door. The base station should indicate whether the sensor is working correctly or needs adjustment.
Reinstalling the Original Sensor
If you decide to reinstall the original sensor instead of relocating it, follow the disassembly and reassembly steps in reverse. Ensure the sensor is properly reattached to the wire leads.
Remember to reapply the cover, securing it tightly to protect the sensor's interior.
Re-arming Your System
Once you've completing the process, re-arm your SimpliSafe system by:
1. Entering your unique master passcode on the keychain remote or the keypad.
2. Pressing the 'On' button on the base station. The 'Armed' light should turn on, indicating the system is active.
Congratulations, you've successfully removed, relocated, or reinstalled your SimpliSafe door sensor! Always remember to test your system after any changes to ensure it's working correctly. If you encounter any issues, don't hesitate to contact SimpliSafe's customer support for assistance.