how to remove adt door sensor

Remove ADT Door Sensor: A Step-by-Step Guide

By Jessica Moore
AD

Trying to remove an ADT door sensor? You're not alone. These devices, part of ADT's renowned security systems, can sometimes feel like they're a permanent fixture. But don't worry, with the right steps and a bit of patience, you can safely remove them. Let's dive in.

Before we start, remember that tampering with your security system can potentially void your warranty or even trigger an alarm. Always disconnect the system before beginning and consider calling ADT if you're unsure about any aspect of the process.

Safety First: Preparing to Remove the ADT Door Sensor

Kicking things off right involves minimizing risks. Firstly, ensure the area around the door sensor is clear, providing ample space to work. Secondly, turn off the power to the alarm system at your home's main electrical panel to avoid any unexpected surprises.

AD
How to Replace Battery in Door Alarm Sensor
How to Replace Battery in Door Alarm Sensor
How to Install Simplisafe Entry Sensor on Door With Molding
How to Install Simplisafe Entry Sensor on Door With Molding
Build a DIY Door Status Sensor
Build a DIY Door Status Sensor

Next, locate your control panel and enter the master code to disarm the system (if not done already). This will typically silence any ensuing alarm beeps. Now you're all set to proceed.

Identify the Sensor Type

ADT uses two main types of door sensors: magnetic reed switches and recessed door sensors. Knowing which you have is crucial for the removal process. Magnetic reed switches have two parts: a magnet and a switch that sits on the door frame. Recessed door sensors, on the other hand, are installed inside the door and frame, often using screws.

How To Fix A Garage Door Sensor Yourself — Jalopnik
How To Fix A Garage Door Sensor Yourself — Jalopnik
How to Remove Alarm Sensor From Door Frame | 4 Useful Guides
How to Remove Alarm Sensor From Door Frame | 4 Useful Guides

Use the images below to identify your sensor type. Remember, if you're unsure, it's always better to ask for professional assistance.

Gather Necessary Tools

Depending on your sensor type, you might need anything from a flathead screwdriver to drill bits. Here's a general list of tools that could come in handy:

AD

  • Flathead or Phillips screwdriver
  • Drill (if needed)
  • Safety glasses
  • Pliers (needle-nose)
  • Scissors

Removing Magnetic Reed Switches

Magnetic reed switches are the simplest to remove. Here's a step-by-step guide:

AD

  1. Using a flathead or Phillips screwdriver (depending on your sensor), carefully unscrew the switch from the door frame. There might be a cable connected to it, so be gentle.
  2. Once the switch is loose, gently pull it out. If there's a cable, disconnect it from the wall's electrical box.
  3. Remove the magnet from the door. It should be held in place by an adhesive that you can peel off.

Removing Recessed Door Sensors

Recessed door sensors involve a bit more work. They're installed inside the door and frame, often using screws and hidden from immediate view.

AD

  1. First, locate the screws securing the sensor to the door or frame. You might need a drill to create a pilot hole if the screw heads are damaged or missing.
  2. Once the screws are removed, carefully pry the sensor out using a flathead screwdriver or a butter knife. If there's a cable, gently tug it out from the wall's electrical box.

Final Touches andSesure

After removing the sensor, clean up the area to leave it looking neat and tidy. If you plan to reinstate the door sensor in the future, keep the components in a safe place for reinstallation.

Finally, remember to reactivate your security system to ensure your home remains protected. And there you have it! You've successfully removed an ADT door sensor.

AD