Step-by-Step: How to Install Your SimpliSafe Door Sensor
Installing a SimpleSafe door sensor is a breeze, and it's a crucial step in securing your home. This wireless component helps protect your entryways, windows, or other doors, alerting you to any unexpected openings. Here's a step-by-step guide on how to install your SimpleSafe door sensor, ensuring your home remains secure.
The SimpleSafe door sensor is a two-part device consisting of a magnet and a sensor. When the magnet comes in contact with the sensor, it closes the circuit, indicating the door is closed. Follow these steps for a seamless installation process.
Understanding Your SimpleSafe Door Sensor
The package includes a magnetic sensor, a magnet, a mounting bracket, double-sided tape, and screws. Familiarizing yourself with these components will make the installation process smoother.
Before you start, ensure the area around the door is clear and free from obstructions to ensure a secure and effective installation.
Determining Placement of the Magnetic Sensor
Decide where you want to place the magnetic sensor. It should be positioned on the door's frame, rather than on the door itself. This ensures that the sensor remains stationary while the magnet moves with the door. Most users prefer placing the sensor near the top of the door frame for better detection.
Once you've decided on a location, mark it lightly with a pencil. This will serve as a guide during installation.
Mounting the Magnetic Sensor
If you've chosen to use the double-sided tape for installation, peel off the protective layer and firmly press the sensor onto the marked spot. Ensure it's level and perpendicular to the floor for optimal performance.
If you prefer using screws, drill a small pilot hole at the marked spot, then screw the mounting bracket onto the door frame. Next, attach the sensor to the bracket, ensuring it's secure and level.
Installing the Magnet on the Door
The magnet should be securely attached to the door itself, not the door frame. It should be aligned directly opposite the magnetic sensor when the door is closed. This ensures the magnet comes into contact with the sensor, closing the circuit.
Just like with the sensor, mark the spot where you want to attach the magnet, then use either double-sided tape or screws to secure it in place.
Aligning the Magnet and Sensor
Once both the sensor and magnet are mounted, close the door gently to ensure they're properly aligned. The magnet should be close enough to the sensor that it triggers the closed circuit. You may need to adjust the position of the magnet slightly until the sensor is triggered.
Once aligned, double-check that the sensor is secure and won't move out of position. You can do this by opening and closing the door a few times.
Testing Your SimpleSafe Door Sensor
With your SimpleSafe system armed, try opening and closing the door to ensure the sensor is working correctly. The system should alert you to any open doors, giving you peace of mind.
Should you encounter any issues, consult the SimpleSafe user manual or reach out to their customer support for further assistance.
Manual installation might seem intimidating, but with these step-by-step instructions, you'll have your SimpleSafe door sensor up and running in no time. erneut