Mastering SimpliSafe: Step-by-Step Guide to Installing an Entry Sensor
Say goodbye to traditional home security systems loaded with complicated equipment. Modern solutions like SimpliSafe make your home safe and simple, with entry sensors that are easy to install and use. In this guide, we'll walk you through the process of installing your SimpliSafe Entry Sensor, ensuring your home's security is just a few clicks away.
The SimpliSafe Entry Sensor is a vital component of your home security system, monitoring doors and windows for intruders. By detecting when a door or window is opened, it triggers your SimpliSafe Base Station to sound the alarm. Let's get your Entry Sensor set up and ready to protect your home.
Understanding Your Entry Sensor
Before we begin the installation, let's familiarize ourselves with the Entry Sensor. It consists of two parts: a magnet and a sensor. The magnet is attached to the door or window, while the sensor is mounted on the door jamb or window frame. When the door or window is opened, the magnet moves away from the sensor, triggering an alert.
Your Entry Sensor comes with the following items in the box: two sensors, four magnets, screws, and double-sided tape. For this guide, we'll focus on using the sensors and magnets, but you can also use the screws or tape for more secure installation options.
Preparing for Installation
Before you start, gather your tools. You'll need a Phillips screwdriver for screws or tape applicator for the double-sided tape. Also, make a note of the doors and windows you want to monitor. It's best to protect the most vulnerable points of entry first.
Next, ensure your SimpliSafe system is powered on and connected to your home's Wi-Fi. This allows your Entry Sensor to sync with your Base Station seamlessly. If you haven't done so already, download and open the SimpliSafe app on your smartphone to check your system's status and ensure it's ready for new devices.
Mounting the Sensor
Now that you're prepared, let's install the sensor part of your Entry Sensor first. Choose a location on the door jamb or window frame where you want to mount the sensor. For a good fit, make sure the sensor's faceplate is flush against the surface.
Hold the sensor in place and mark the screw holes or tape application points. If you're using screws, drill pilot holes before screwing the sensor in place. For double-sided tape, apply it to the marked areas and firmly press the sensor onto the surface. Test the sensor's position by opening and closing the door or window to ensure it works correctly.
Attaching the Magnet
With the sensor securely mounted, it's time to attach the magnet. Depending on your door or window type, you may need to adjust the magnet's placement. For most doors and windows, the magnet should be mounted on the moving part, close to the sensor when the door or window is closed.
Using the provided screws or tape, attach the magnet to the door or window. Again, test the sensor by opening and closing the door or window to ensure the magnet moves correctly and triggers the sensor. If the sensor doesn't trigger, adjust the magnet's position slightly and test again.
Syncing Your Entry Sensor
With your Entry Sensor hardware in place, it's time to connect it to your SimpliSafe system. Open the SimpliSafe app on your smartphone and follow these steps:
1. Tap the 'More' tab at the bottom right of the app's home screen.
2. Select 'Settings' and then 'Devices'.
3. Tap 'Add new device', select 'Entry Sensor', and follow the on-screen instructions to sync your new sensor.
4. Once your Entry Sensor is synced, name it for easy identification in the app. We recommend naming it after the door or window it's protecting, e.g., 'Front Door' or 'Bedroom Window'.
Testing Your Entry Sensor
Now that your Entry Sensor is synced, test it to ensure it's working correctly. Gently open the door or window it's monitoring and listen for the chime from your Base Station. You should also receive an alert on your smartphone via the SimpliSafe app.
If your Entry Sensor isn't triggering when you expect it to, double-check that the magnet is placed correctly and that nothing is blocking the sensor. If necessary, re-adjust the magnet's position or contact SimpliSafe customer support for further assistance.
Congratulations! Your SimpliSafe Entry Sensor is now installed and ready to protect your home. With this guide, you've taken a significant step in securing your home using modern, user-friendly technology. Monitor your system via the SimpliSafe app, and rest easy knowing your family and belongings are safe and sound. Why not explore other SimpliSafe devices to further enhance your home security?