how to replace simplisafe motion sensor battery

"Step-by-Step: Replacing Your SimpliSafe Motion Sensor Battery"

By Brian Jones
AD

Every SimpliSafe motion sensor is powered by a 3V CR2032 lithium battery, and when it's time for a replacement, you'll receive a low-battery warning. Replacing it is a simple process that won't disrupt your security system. Here's a step-by-step guide on how to replace your SimpliSafe motion sensor battery.

Before you start, ensure you have a 3V CR2032 lithium battery or a SimpliSafe replacement kit handy. The process takes just a few minutes, and it's straightforward, even for beginners.

Safely Removing the Motion Sensor

Start by carefully removing your motion sensor from its mounting location. If it's secured with screws, use an Allen wrench or a screwdriver to loosen them. If it's installed using the adhesive pad, gently peel it off.

AD
How to Replace ADT Window Sensor Battery
How to Replace ADT Window Sensor Battery
How to Reset Battery Current Sensor
How to Reset Battery Current Sensor
How to Open Adt Motion Sensor
How to Open Adt Motion Sensor

Once removed, avoid any accidental triggered alerts. Keep it away from your pet and other motion sources as you'll be handling the internal components.

Accessing the Battery Compartment

Each motion sensor has a plastic cover that protects the battery and internal components. To open it, you'll need a small, flat-head screwdriver. Insert it into the small hole located at the top of the sensor and gently pry the cover off.

How to Wire a Motion Sensor to Multiple Lights (DIY Guide)
How to Wire a Motion Sensor to Multiple Lights (DIY Guide)
How to Keep Lights On Without Motion Trigger
How to Keep Lights On Without Motion Trigger

Be careful not to damage the sensor during this process. The covers are snapped on, so they should come off with a little bit of coaxing.

Removing the Old Battery

With the cover off, you'll see the old battery. It's secured with an anti-tamper tab to prevent accidental removal. Carefully use your fingernail or tweezers to release this tab. Then, slide the battery away from the '+' symbol located on the side of the battery compartment.

AD

Slide the battery out gently. It should come out easily once the tab is released and it's slid away from the '+' symbol. CR2032 batteries are flat and have no initial polarity, so there's no wrong way to remove them.

Inserting the New Battery

Take your new 3V CR2032 lithium battery and slide it into the battery compartment. Make sure to align the '+' symbol on the battery with the '+' symbol in the battery compartment.

Use the anti-tamper tab to secure the new battery in place. Push the tab gently until you hear a click, ensuring the battery is fully inserted and secure.

AD

Replacing the Cover and Remounting the Sensor

After the new battery is in place, replace the plastic cover. Secure it back onto the motion sensor by snapping it into place. Be careful not to bend or break the cover.

Remount the motion sensor back onto its base using the screws or the adhesive pad, depending on your original installation method. Ensure it's firmly secured to avoid any accidental movement that may trigger false alerts.

Test your motion sensor by walking in front of it. You should see the green LED light up, indicating that it's working properly with the new battery. If it's not working, double-check that you've correctly installed the battery and that the sensor is properly mounted.

AD

Remember, regular maintenance is key to keeping your SimpliSafe system in top shape. Don't forget to check your batteries every six months or so. Stay secure, and happy protecting!

AD