how to remove pex pipe from sharkbite fitting

How to Remove PEX Pipe from SharkBite Fitting: A Step-by-Step Guide

By Mark Smith
AD

Are you dealing with a pesky PEX pipe stuck in a SharkBite fitting, leaving you frustrated and desperate for a way out? You're not alone. Many homeowners and professionals have found themselves in this conundrum. But don't worry, it's a common and surmountable issue. Let's dive into a straightforward, step-by-step guide on how to remove PEX pipe from SharkBite fitting, ensuring your project stays on track and frustration-free.

Before we start, gather your tools: channel locks, tongue-and-groove pliers, pipe cutter, and maybe some PB Blaster or another lubricant. Now, let's tackle this problem head-on.

Understanding the Problem: Why PEX Won't Budge

PEX pipe, known for its flexibility and durability, can sometimes become a tight fit in SharkBite fittings, making it challenging to remove. The problem lies in the deformable nature of PEX, which can conform and squeeze into the fitting's teeth, creating an airtight seal. However, don't let this deter you. With the right techniques, you can loosen that grip and bid farewell to your stubborn PEX pipe.

AD
Use piece of PEX pipe to remove Shark bite fitting/couplings. #howto #diy #sharkbite #plumbing
Use piece of PEX pipe to remove Shark bite fitting/couplings. #howto #diy #sharkbite #plumbing
How to Remove Pex Clamps
How to Remove Pex Clamps
6 TRICKS To Remove A Sharkbite Fitting (New Tricks!) | GOT2LEARN
6 TRICKS To Remove A Sharkbite Fitting (New Tricks!) | GOT2LEARN

First, let's address the elephant in the room - the teeth on SharkBite fittings. These teeth aren't there to make your life difficult; they're designed to grip the pipe tightly, ensuring a secure and leak-free connection. But when the time comes to remove the pipe, they can seem like a veritable fortress. Fear not, for we have the blueprint to conquer this apparent barrier.

Preparation: Lubrication and the Right Tools

Before you start wrestling with the pipe, grab your lubricant. PB Blaster or another high-quality pipe lubricant can work wonders in loosening the grip of the SharkBite fitting's teeth. Spray it liberally around the fitting, ensuring it penetrates between the pipe and the fitting's teeth. Let it sit for a few minutes to do its magic.

6 TRICKS To Remove A Sharkbite Fitting (New Tricks!) | GOT2LEARN
6 TRICKS To Remove A Sharkbite Fitting (New Tricks!) | GOT2LEARN
How to connect Copper to Pex using SharkBite Fittings...
How to connect Copper to Pex using SharkBite Fittings...

While the lubricant works, prepare your tools. Channel locks or tongue-and-groove pliers are indispensable in this process. They provide the much-needed grip and leverage to twist the pipe. Also, have your pipe cutter at the ready. You might need it as a last resort if all else fails.

Techniques to Loosen the Grip: Step-by-Step

Now that you're adequately equipped and prepared, let's try some techniques to loosen the PEX pipe from the SharkBite fitting.

AD

Method 1: The Twisting Motion - Apply your channel locks or pliers firmly onto the pipe, as close to the fitting as possible. Then, twist the pipe gently but firmly in the opposite direction you would normally turn a nut. The idea is to break the seal between the pipe and the fitting's teeth.

Method 2: The Back-and-Forth Motion - If the twisting motion isn't working, try a back-and-forth motion instead. Grip the pipe firmly and pull it back slightly, then push it in again. Repeat this process, applying increasing pressure and force until the pipe starts to budge.

Method 3: The Lubricant Reapplication - If you've tried the above methods without success, it might not be lubricant failure. The lubricant might have evaporated or dried up. Apply lubricant again, let it sit, and then try the twisting or back-and-forth motion again.

AD

When All Else Fails: Cutting the Pipe

Unfortunately, there might come a time when the pipe just won't budge, no matter how much lubricant you apply or how hard you twist. In such cases, cutting the pipe might be your only resort. But before you grab your pipe cutter, consider this: cutting the pipe means you'll have to replace it, adding to the time and cost of your project. Only proceed with this option if you're absolutely certain there's no other way to remove the pipe.

If you've decided to cut the pipe, mark the area you want to cut with a permanent marker. Apply gentle pressure with your pipe cutter, ensuring you're cutting straight and evenly. Once cut, you can unscrew the fitting from the remaining pipe stub and proceed with reinstallation.

Remember, cutting the pipe should always be your last resort. It's messy, time-consuming, and costly, compared to removing the pipe intact. Always try other methods first, and don't be afraid to enlist help or seek professional advice if the pipe still won't budge.

AD

Removing a PEX pipe from a SharkBite fitting can be a jaundiced task, but with the right techniques and a bit of patience, you can overcome this hurdle and move on to the next phase of your project. The key lies in understanding the reasons behind the tough grip, using appropriate tools and lubricants, and applying the right techniques consistently. So, grab your tools, get your hands dirty, and let's get that PEX pipe out of there!

AD