how to remove pvc pipe from fitting

Step-by-Step Guide: Removing PVC Pipe from Fittings

By Joseph Williams
AD

Removing PVC pipe from a fitting can be a daunting task, but with the right techniques and a bit of patience, it's definitely doable. Whether you're dealing with a leak, geometrical mismatch, or simply need to replace your pipe, knowing how to disconnect PVC pipe from a fitting is a crucial skill. Let's dive into the steps and tools you'll need to successfully detach PVC pipe from a fitting.

Before we embark on this task, safety should be your top priority. Put on work gloves to protect your hands, and wear safety glasses to shield your eyes from any debris. Also, ensure the work area is well-ventilated, as PVC can emit toxic fumes when heated.

Understanding PVC Pipe and Fittings

Familiarizing yourself with the types of PVC pipe and fittings is essential. PVC pipe comes in two types:schedule 40 (thicker walls for underground use) and Schedule 80 (thinner walls for above-ground use). Fittings, on the other hand, are categorized into slip (no lip at the bevel), solvent weld (lip at the bevel for strong welds), and mechanical (uses washers and olive nuts for flexibility).

AD
How To / The Best way to remove glued PVC pipe. Reuse the fitting. Easy!
How To / The Best way to remove glued PVC pipe. Reuse the fitting. Easy!
How To / The Best way to remove glued PVC pipe. Reuse the fitting. Easy!
How To / The Best way to remove glued PVC pipe. Reuse the fitting. Easy!
3 GENIUS Ways to Remove PVC Pipe from Fitting (Without a Heat Gun)
3 GENIUS Ways to Remove PVC Pipe from Fitting (Without a Heat Gun)

Knowing the type of fitting you're dealing with will help you choose the appropriate tool and method. For this guide, we'll focus on removing PVC pipe from solvent weld fittings, the most common type found in households and commercial buildings.

Gather Your Tools

Before you start, gather your tools. You'll need:

4 GENIUS Ways To Remove Glued PVC Fittings | GOT2LEARN
4 GENIUS Ways To Remove Glued PVC Fittings | GOT2LEARN
a person is holding a pipe in their hand and pointing it at the ground below
a person is holding a pipe in their hand and pointing it at the ground below
  • H Hack saw or PVC pipe cutter
  • PVC primer and cement
  • PVC pipe and fittings
  • Scoring tool (optional, for precise cutting)
  • Heavy-duty work gloves
  • Safety glasses
  • Measuring tape
  • Hacksaw blade (if using a hacksaw)

Preparing the Pipe and Fitting for Disassembly

Before you can disconnect the PVC pipe from the fitting, you need to break the solvent weld that holds them together. This is typically done by heating the fitting until it softens and the pipe slips out easily.

One way to do this is by using a heat gun. Apply even heat along the length of the fitting, keeping the heat gun in constant motion to avoid melting any one spot too much. Alternatively, you can use a torch, but be extra careful not to apply too much heat, as this can damage the pipe and fitting.

AD

Disconnecting the PVC Pipe

Once the fitting has softened, try to twist and wiggle the pipe to break the seal. If the pipe is stuck, you can use specific PVC pipe removal tools, such as pipe grips or a pry bar. However, these tools should only be used as a last resort to avoid damaging the pipe.

For most cases, applying heat should be sufficient. If the fitting has softened but the pipe is still not budging, try scoring the outside of the pipe a few inches from the fitting. This will create a weak point that should break more easily when you apply pressure.

Removing the Remaining PVC Debris

After successfully removing the PVC pipe, you might be left with some debris or bits of pipe inside the fitting. To clean this out, use a wire brush or, for hard-to-reach spots, a piece of wire. Be gentle to avoid damaging the fitting's interior.

AD

Once the fitting is clean, apply some PVC primer to the inside, ensuring it's well-coated. This will help prevent any new pipes or fittings you attach from leaking. Now, you're ready to reconnect or repurpose your PVC fitting.

Removing PVC pipe from a fitting doesn't have to be an overly complicated process. With the right tools and techniques, you can efficiently detach PVC pipe from a fitting and give it a new purpose. Happy plumbing!

AD