How to Remove PEX from SharkBite: Step-by-Step Guide
Galvanized iron corrosion, clogged lines, or a desire to upgrade to a better system—these are just a few reasons why you might need to remove PEX (Cross-Linked Polyethylene) piping from your sharkbite compression fittings. If you're here, you're likely already aware of the importance of using the right tools and techniques to avoid damage or improper removal. Let's dive into a comprehensive guide on how to remove PEX from sharkbite, keeping safety, efficiency, and your sanity in check.
Before we proceed, let's briefly discuss the materials and tools you'll need. You'll be working with sharp tools, so safety glasses and gloves are a must. Additionally, having the right tools like a tube cutter, a sharkbite release tool, or even a hacksaw, can significantly ease the process.
Understanding PEX and SharkBite Fittings
It's crucial to understand the differences between PEX and other piping materials, as well as the unique design of sharkbite fittings. PEX is a flexible, durable, and reliable piping material that's resistant to scale buildup and can withstand both high and low temperatures. Sharkbite fittings, on the other hand, are compression fittings that don't require soldering, making them quick and easy to install and remove.
Familiarizing yourself with these two components is key to ensuring a successful removal process. Let's explore why understanding their properties is essential in the next sections.
Why Understanding PEX is Important
PEX is a remarkable piping material, but it's not indestructible. It can degrade when exposed to UV light, chloride ions, or certain chemicals. Knowing how PEX behaves under different conditions helps you avoid potential damage while removing it. For instance, cutting or sawing PEX can cause it to rasp or tear if not done correctly, which in turn can lead to leaks.
Moreover, PEX is designed to expand and contract with temperature changes, which can make it feel unresponsive or 'squishy' to the touch. This flexibility is a major reason PEX is preferred over other piping materials, but it's something to keep in mind while working with it.
The Magic of SharkBite Fittings
Sharkbite fittings are known for their ease of use and versatility. They can join PEX, copper, and even CPVC pipes. Their unique design features rings that, when compressed, grip the piping material tightly, creating a secure seal. These rings, however, can also be tricky to release without the right technique.
Knowing how sharkbite fittings work is crucial because improper removal can result in damaged fittings or pipes, leading to leaks and potential water damage. The good news is, with the right tools and techniques, removing PEX from sharkbite fittings can be straightforward.
Preparation: Gather Your Tools and Materials
Efficient removal starts with having the right tools. Here's a list of essentials you'll need:
- Tube cutter or hacksaw
- Sharkbite release tool or a flathead screwdriver
- Pipe wrench or channel lock pliers
- Tape measure
- Galeria tools or a coping saw (for PEX expansion rings)
- Safety glasses and work gloves
You'll also need a basic understanding of your plumbing system. Locate the fixtures and appliances connected to the PEX pipe you want to remove. Knowing where the pipe runs and its connections will save you time and stress during the removal process.
Once you've gathered your tools and have a good understanding of your plumbing layout, you're ready to start removing the PEX pipe.
Step-by-Step: Removing PEX from SharkBite Fittings
Here's a step-by-step guide to removing PEX from sharkbite fittings. Remember to exercise caution and patience throughout the process.
- Turn off the main water supply valve. This prevents any water from contained in the pipes from escaping and causing a mess.
- Drain the water from the pipes. To do this, open faucets and let the water flow until no water comes out. This helps to empty the pipes and minimize any potential water damage.
- Identify the cut points. Use your tape measure to locate where you'll cut the PEX pipe. Make sure the cuts are far enough from the fittings to allow the removal of both the pipe and the fitting.
- Cut the PEX pipe. Using your tube cutter or hacksaw, carefully cut through the PEX pipe at the marked points. Be sure to secure the pipe firmly to prevent it from moving or twisting. When using a tube cutter, place it around the pipe, gently tighten the adjustable nut, and rotate the tool around the pipe until it cuts through.
- Remove the sharkbite inserts. The PEX pipe should now be loose and ready for removal. However, before you pull the pipe out, remove the sharkbite inserts. Look for the brass insert in the fitting and use a sharkbite release tool or a flathead screwdriver to slowly unscrew it counterclockwise. Be careful not to strip or break the insert.
- Pull out the PEX pipe. With the sharkbite inserts removed, you should be able to easily pull the PEX pipe out from both ends. If you encounter resistance, gently twist the pipe back and forth to help loosen it. In some cases, you may need to use a pipe wrench or channel lock pliers to grip the pipe and apply steady pressure.
With these steps, you should now have your PEX pipe removed from the sharkbite fittings. If you're reinstalling new pipe, make sure to follow the same steps but in reverse, ensuring you create a proper seal with the new pipe.
What to Do If You Encounter Resistance
Occasionally, you may encounter resistance when removing the PEX pipe. Here are a few tips to help you overcome this:
- Lubricate the pipe. If the PEX pipe is resistant, try using a little bit of lubricant, like WD-40, on the inside and outside of the pipe. This can help reduce friction and make removal easier.
- Heat the fitting. In some cases, applying heat to the fitting can help to release the grip. However, be cautious when using heat, as it can damage certain types of pipe and fitting materials.
- Soak the fitting. For especially stubborn fittings, you can submerge the joint in a bucket of hot water for about 30 minutes. The heat can help to loosen the grip and make removal easier.
Remember, if the resistance is too great, it might be safer to call a professional plumber to avoid damaging your pipes or fittings.
Troubleshooting Common Issues
While removing PEX from sharkbite fittings is generally straightforward, issues can arise. Here are some common problems and their solutions:
Leaky Fittings
If your fittings are leaking, it's possible that the O-ring inside the fitting is damaged or worn out. Inspect the fitting and replace any damaged O-rings before reinstalling the pipe.
Broken or Damaged Fittings
If a fitting is broken or damaged beyond repair, you'll need to replace it. Make sure to match the new fitting to the type of pipe you're using (PEX, copper, or CPVC) and follow the manufacturer's instructions for proper installation.
Resistance When Reinstalling
If you're experiencing resistance when reinstalling the PEX pipe, it might be due to over- or under- expansion of the pipe. Make sure you're following the manufacturer's recommended expansion rates and use the right tools to avoid damaging the pipe.
Regular maintenance and inspection of your plumbing system can help you identify and address potential issues before they become major problems. If you're ever in doubt about your ability to handle a particular plumbing task, don't hesitate to call a professional plumber.
Now that you know how to remove PEX from sharkbite fittings, you're well on your way to becoming a plumbing pro. Whether you're upgrading your system, dealing with a leak, or simply curious about how your plumbing works, understanding how to remove PEX from sharkbite fittings can save you time and money. Happy plumbing!